Re: [PATCH v2] mtd: Fix mtd not the same name not registered if nvmem

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Ricardo,

Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx> wrote on Tue, 14 Apr 2020
15:47:23 +0200:

> Ping?
> 
> On Thu, Apr 2, 2020 at 8:59 AM Ricardo Ribalda Delgado
> <ribalda@xxxxxxxxxx> wrote:
> >
> > When the nvmem framework is enabled, a nvmem device is created per mtd
> > device/partition.
> >
> > It is not uncommon that a device can have multiple mtd devices with
> > partitions that have the same name. Eg, when there DT overlay is allowed
> > and the same device with mtd is attached twice.
> >
> > Under that circumstances, the mtd fails to register due to a name
> > duplication on the nvmem framework.
> >
> > With this patch we add a _1, _2, _X to the subsequent names if there is
> > a collition, and throw a warning, instead of not starting the mtd
> > device.
> >
> > [    8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
> > [    8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
> > [    8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
> > [    8.948994] Call Trace:
> > [    8.948996]  dump_stack+0x50/0x70
> > [    8.948998]  sysfs_warn_dup.cold+0x17/0x2d
> > [    8.949000]  sysfs_do_create_link_sd.isra.0+0xc2/0xd0
> > [    8.949002]  bus_add_device+0x74/0x140
> > [    8.949004]  device_add+0x34b/0x850
> > [    8.949006]  nvmem_register.part.0+0x1bf/0x640
> > ...
> > [    8.948926] mtd mtd8: Failed to register NVMEM device
> >
> > Signed-off-by: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx>

Thanks for proposing this change. Indeed we are aware of the problem
and the best solution that we could come up with was to create an
additional "unique_name" field to the mtd_info structure. This new
field would have the form:

    [<parent-unique-name><separator>]<mtd-name>

The separator might be '~' (but I am completely open on that), and that
would give for instance:

    my-controller~my-device~my-part~mysub-part

Then, you might use this mtd->unique_name instead of mtd->name. Would
you give this logic a try?

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/