[PATCH 12/17] mtd: rawnand: cafe: Don't split things when reading/writing a page

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

Calling nand_read_page_op(pagesize)/nand_prog_page_begin_op(pagesize)
and expecting to get a pagesize+oobsize read from/written to the
read/write buffer is fragile and only works because of hacks done
in cmdfunc(). Let's read/write the page in one go, using the page
cache buffer as a bounce buffer.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/cafe_nand.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 31493a201a02..edf65197604b 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -472,6 +472,7 @@ static int cafe_nand_read_page(struct nand_chip *chip, uint8_t *buf,
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct cafe_priv *cafe = nand_get_controller_data(chip);
+	void *pagebuf = nand_get_data_buf(chip);
 	unsigned int max_bitflips = 0;
 	u32 ecc_result, status;
 
@@ -479,8 +480,11 @@ static int cafe_nand_read_page(struct nand_chip *chip, uint8_t *buf,
 		cafe_readl(cafe, NAND_ECC_RESULT),
 		cafe_readl(cafe, NAND_ECC_SYN_REG(0)));
 
-	nand_read_page_op(chip, page, 0, buf, mtd->writesize);
-	chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_read_page_op(chip, page, 0, pagebuf,
+			  mtd->writesize + mtd->oobsize);
+
+	if (buf != pagebuf)
+		memcpy(buf, pagebuf, mtd->writesize);
 
 	ecc_result = cafe_readl(cafe, NAND_ECC_RESULT);
 	status = CAFE_FIELD_GET(NAND_ECC_RESULT, STATUS, ecc_result);
@@ -642,15 +646,17 @@ static int cafe_nand_write_page(struct nand_chip *chip,
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct cafe_priv *cafe = nand_get_controller_data(chip);
+	void *pagebuf = nand_get_data_buf(chip);
 	int ret;
 
-	nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
-	chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
+	if (pagebuf != buf)
+		memcpy(pagebuf, buf, mtd->writesize);
 
 	/* Set up ECC autogeneration */
 	cafe->ctl2 |= CAFE_NAND_CTRL2_AUTO_WRITE_ECC;
 
-	ret = nand_prog_page_end_op(chip);
+	ret = nand_prog_page_op(chip, page, 0, pagebuf,
+				mtd->writesize + mtd->oobsize);
 
 	/*
 	 * And clear it before returning so that following write operations
-- 
2.25.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/