[PATCH v2 5/6] mtd: rawnand: marvell: Rename a function to clarify

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Cosmetic change to clarify the purpose of the function.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/marvell_nand.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 10b7f43d28e6..d6b978234933 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2166,8 +2166,8 @@ static const struct mtd_ooblayout_ops marvell_nand_ooblayout_ops = {
 	.free = marvell_nand_ooblayout_free,
 };
 
-static int marvell_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
-					 struct nand_ecc_ctrl *ecc)
+static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
+					       struct nand_ecc_ctrl *ecc)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
@@ -2261,7 +2261,7 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
 
 	switch (ecc->mode) {
 	case NAND_ECC_HW:
-		ret = marvell_nand_hw_ecc_ctrl_init(mtd, ecc);
+		ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
 		if (ret)
 			return ret;
 		break;
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/