[PATCH v2 7/9] mtd: rawnand: onfi: Drop a useless parameter page read

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

During detection the logic on the NAND bus is:

    /* Regular ONFI detection */
    1/ read the three NAND parameter pages

    /* Extended parameter page detection */
    2/ send "read the NAND parameter page" commands without reading
       actual data
    3/ move the column pointer to the extended page and read it

If fact, as long as there is nothing happening on the NAND bus between
1/ and 3/, the operation 2/ is redundant so remove it.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/mtd/nand/raw/nand_onfi.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index 6576b841bc56..2fc71b7c361f 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -47,12 +47,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
 	if (!ep)
 		return -ENOMEM;
 
-	/* Send our own NAND_CMD_PARAM. */
-	ret = nand_read_param_page_op(chip, 0, NULL, 0);
-	if (ret)
-		goto ext_out;
-
-	/* Use the Change Read Column command to skip the ONFI param pages. */
+	/*
+	 * Use the Change Read Column command to skip the ONFI param pages and
+	 * ensure we read at the right location.
+	 */
 	ret = nand_change_read_column_op(chip,
 					 sizeof(*p) * p->num_of_param_pages,
 					 ep, len, true);
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/