Re: [PATCH v2 2/2] mtd: rawnand: Add NAND controller support on Intel LGM SoC

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

On Fri, 17 Apr 2020 16:21:47 +0800
"Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:

> +
> +	res = devm_platform_ioremap_resource_byname(pdev, lgm_host->cs_name);
> +	lgm_host->nandaddr_va = res;
> +	nandaddr_pa = res->start;
> +	if (IS_ERR(lgm_host->nandaddr_va))
> +		return PTR_ERR(lgm_host->nandaddr_va);

Hm, I didn't realize you needed the physical address for DMA transfers.
Just use platform_get_resource_by_name()+devm_ioremap_resource() in
that case.


> +
> +	writel(LGM_BUSCON_CMULT_V4 | LGM_BUSCON_RECOVC(1) |
> +	       LGM_BUSCON_HOLDC(1) | LGM_BUSCON_WAITRDC(2) |
> +	       LGM_BUSCON_WAITWRC(2) | LGM_BUSCON_BCGEN_CS | LGM_BUSCON_ALEC |
> +	       LGM_BUSCON_SETUP_EN, lgm_host->lgm_va + LGM_BUSCON(cs));

I'm sure some the timings you hardcode here can be extracted from the
NAND timings. Can you see if you can implement ->setup_data_interface()
instead.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/