Re: [PATCH] mtd: spi-nor: add cmdlineparts to intel-spi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 16, 2020 at 09:28:28AM -0700, Ronald G. Minnich wrote:
> On Intel platforms, the usable SPI area is located several
> MiB in from the start, to leave room for descriptors and
> the Management Engine binary. Further, not all the remaining
> space can be used, as the last 16 MiB contains firmware.
> 
> To make the SPI usable for mtdblock and other devices,
> it is necessary to enable command line partitions so the
> middle usable region can be specified.
> 
> Add a part_probes array which includes only "cmdelineparts",
> and change to mtd_device_parse_register to use this part_probes.
> 
> Signed-off-by: Ronald G. Minnich <rminnich@xxxxxxxxxx>

I guess the $subject should be something like:

  mtd: spi-nor: controllers: intel-spi: Add support for command line partitions

The patch itself looks good to me,

Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux