Hi Xiaoming, Xiaoming Ni <nixiaoming@xxxxxxxxxx> wrote on Mon, 30 Mar 2020 21:45:25 +0800: > The function call process is as follows: > mtd_blktrans_work() > while (1) > do_blktrans_request() > mtdblock_writesect() > do_cached_write() > write_cached_data() /*if cache_state is STATE_DIRTY*/ > erase_write() > > write_cached_data() returns failure without modifying cache_state > and cache_offset. So when do_cached_write() is called again, > write_cached_data() will be called again to perform erase_write() > on the same cache_offset. > > But if this cache_offset points to a bad block, erase_write() will > always return -EIO. Writing to this mtdblk is equivalent to losing > the current data, and repeatedly writing to the bad block. > > Repeatedly writing a bad block has no real benefits, > but brings some negative effects: > 1 Lost subsequent data > 2 Loss of flash device life > 3 erase_write() bad blocks are very time-consuming. For example: > the function do_erase_oneblock() in chips/cfi_cmdset_0020.c or > chips/cfi_cmdset_0002.c may take more than 20 seconds to return > > Therefore, when erase_write() returns -EIO in write_cached_data(), > clear cache_state to avoid writing to bad blocks repeatedly. > > Signed-off-by: Xiaoming Ni <nixiaoming@xxxxxxxxxx> > Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > Cc: stable@xxxxxxxxxxxxxxx Still missing: * Fixes: tag * Wrong title prefix ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/