Hello,
This is the NAND PR for 5.7.
Thanks,
Miquèl
The following changes since commit 98d54f81e36ba3bf92172791eba5ca5bd813989b:
Linux 5.6-rc4 (2020-03-01 16:38:46 -0600)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.7
for you to fetch changes up to fca88925d76978b7f20de42d8ead34fb91500003:
mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) (2020-03-25 22:13:04 +0100)
----------------------------------------------------------------
Raw NAND core changes:
* Add support for manufacturer specific suspend/resume operation
* Add support for manufacturer specific lock/unlock operation
* Replace zero-length array with flexible-array member
* Fix a typo ("manufecturer")
* Ensure nand_soft_waitrdy wait period is enough
Raw NAND controller driver changes:
* Brcmnand:
Add support for flash-edu for dma transfers (+ bindings)
* Cadence:
Reinit completion before executing a new command
Change bad block marker size
Fix the calculation of the avaialble OOB size
Get meta data size from registers
* Qualcom:
Use dma_request_chan() instead dma_request_slave_channel()
Release resources on failure within qcom_nandc_alloc()
* Allwinner:
Use dma_request_chan() instead dma_request_slave_channel()
* Marvell:
Use dma_request_chan() instead dma_request_slave_channel()
Release DMA channel on error
* Freescale:
Use dma_request_chan() instead dma_request_slave_channel()
* Macronix:
Add support for Macronix NAND randomizer (+ bindings)
* Ams-delta:
Rename structures and functions to gpio_nand*
Make the driver custom I/O ready
Drop useless local variable
Support custom driver initialisation
Add module device tables
Handle more GPIO pins as optional
Make read pulses optional
Don't hardcode read/write pulse widths
Push inversion handling to gpiolib
Enable OF partition info support
Drop board specific partition info
Use struct gpio_nand_platdata
Write protect device during probe
* Ingenic:
Use devm_platform_ioremap_resource()
Add dependency on MIPS || COMPILE_TEST
* Denali:
Deassert write protect pin
* ST:
Use dma_request_chan() instead dma_request_slave_channel()
Raw NAND chip driver changes:
* Toshiba:
Support reading the number of bitflips for BENAND (Built-in ECC NAND)
* Macronix:
Add support for deep power down mode
Add support for block protection
SPI-NAND core changes:
* Do not erase the block before writing a bad block marker
* Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
* Stop using spinand->oobbuf for buffering bad block markers
* Rework detect procedure for different READ_ID operation
SPI-NAND driver changes:
* Toshiba:
Support for new Kioxia Serial NAND
Rename function name to change suffix and prefix (8Gbit)
Add comment about Kioxia ID
* Micron:
Add new Micron SPI NAND devices with multiple dies
Add M70A series Micron SPI NAND devices
identify SPI NAND device with Continuous Read mode
Add new Micron SPI NAND devices
Describe the SPI NAND device MT29F2G01ABAGD
Generalize the OOB layout structure and function names
----------------------------------------------------------------
Christophe Kerello (1):
mtd: rawnand: free the nand_device object
Chuanhong Guo (1):
mtd: spinand: rework detect procedure for different READ_ID operation
Frieder Schrempf (3):
mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers
mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
mtd: spinand: Do not erase the block before writing a bad block marker
Gustavo A. R. Silva (1):
mtd: rawnand: Replace zero-length array with flexible-array member
Janusz Krzysztofik (14):
mtd: rawnand: ams-delta: Write protect device during probe
mtd: rawnand: ams-delta: Use struct gpio_nand_platdata
ARM: OMAP1: ams-delta: Provide board specific partition info
mtd: rawnand: ams-delta: Drop board specific partition info
mtd: rawnand: ams-delta: Enable OF partition info support
mtd: rawnand: ams-delta: Push inversion handling to gpiolib
mtd: rawnand: ams-delta: Don't hardcode read/write pulse widths
mtd: rawnand: ams-delta: Make read pulses optional
mtd: rawnand: ams-delta: Handle more GPIO pins as optional
mtd: rawnand: ams-delta: Add module device tables
mtd: rawnand: ams-delta: Support custom driver initialisation
mtd: rawnand: ams-delta: Drop useless local variable
mtd: rawnand: ams-delta: Make the driver custom I/O ready
mtd: rawnand: ams-delta: Rename structures and functions to gpio_nand*
Jonathan Neuschäfer (1):
mtd: rawnand: Fix a typo ("manufecturer")
Kamal Dasu (3):
dt: bindings: brcmnand: Add support for flash-edu
arch: mips: brcm: Add 7425 flash-edu support
mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers
Martin Devera (1):
mtd: rawnand: Ensure nand_soft_waitrdy wait period is enough
Masahiro Yamada (1):
mtd: rawnand: denali: deassert write protect pin
Mason Yang (6):
mtd: rawnand: Add support for Macronix NAND randomizer
dt-bindings: mtd: Document Macronix NAND device bindings
mtd: rawnand: Add support for manufacturer specific lock/unlock operation
mtd: rawnand: Macronix: Add support for block protection
mtd: rawnand: Add support for manufacturer specific suspend/resume operation
mtd: rawnand: macronix: Add support for deep power down mode
Paul Cercueil (2):
mtd: rawnand: ingenic: Use devm_platform_ioremap_resource()
mtd: rawnand: ingenic: Add dependency on MIPS || COMPILE_TEST
Peter Ujfalusi (7):
mtd: rawnand: gpmi: Use dma_request_chan() instead dma_request_slave_channel()
mtd: rawnand: marvell: Release DMA channel on error
mtd: rawnand: marvell: Use dma_request_chan() instead dma_request_slave_channel()
mtd: rawnand: sunxi: Use dma_request_chan() instead dma_request_slave_channel()
mtd: rawnand: qcom: Release resources on failure within qcom_nandc_alloc()
mtd: rawnand: qcom: Use dma_request_chan() instead dma_request_slave_channel()
mtd: rawnand: stm32_fmc2: Use dma_request_chan() instead dma_request_slave_channel()
Piotr Sroka (4):
mtd: rawnand: cadence: get meta data size from registers
mtd: rawnand: cadence: fix the calculation of the avaialble OOB size
mtd: rawnand: cadence: change bad block marker size
mtd: rawnand: cadence: reinit completion before executing a new command
Shivamurthy Shastri (6):
mtd: spinand: micron: Generalize the OOB layout structure and function names
mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
mtd: spinand: micron: Add new Micron SPI NAND devices
mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
mtd: spinand: micron: Add M70A series Micron SPI NAND devices
mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
Yoshio Furuyama (4):
mtd: spinand: toshiba: Add comment about Kioxia ID
mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
mtd: spinand: toshiba: Support for new Kioxia Serial NAND
mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 10 ++--
Documentation/devicetree/bindings/mtd/nand-macronix.txt | 27 +++++++++++
arch/arm/mach-omap1/board-ams-delta.c | 47 ++++++++++++++++--
arch/mips/boot/dts/brcm/bcm7425.dtsi | 4 +-
drivers/mtd/nand/raw/ams-delta.c | 243 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 293 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
drivers/mtd/nand/raw/cadence-nand-controller.c | 34 +++++++------
drivers/mtd/nand/raw/denali.c | 1 +
drivers/mtd/nand/raw/denali.h | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 21 ++++----
drivers/mtd/nand/raw/ingenic/Kconfig | 1 +
drivers/mtd/nand/raw/ingenic/ingenic_ecc.c | 4 +-
drivers/mtd/nand/raw/internals.h | 1 +
drivers/mtd/nand/raw/marvell_nand.c | 40 +++++++++++-----
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mtk_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 62 +++++++++++++++++++++---
drivers/mtd/nand/raw/nand_hynix.c | 2 +-
drivers/mtd/nand/raw/nand_macronix.c | 227 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/raw/nand_toshiba.c | 58 +++++++++++++++++++++-
drivers/mtd/nand/raw/qcom_nandc.c | 105 ++++++++++++++++++++++++----------------
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 44 ++++++++++++++---
drivers/mtd/nand/raw/sunxi_nand.c | 17 ++++---
drivers/mtd/nand/spi/core.c | 104 +++++++++++++++++++++++++++-------------
drivers/mtd/nand/spi/gigadevice.c | 45 +++++-------------
drivers/mtd/nand/spi/macronix.c | 30 +++---------
drivers/mtd/nand/spi/micron.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
drivers/mtd/nand/spi/paragon.c | 28 +++--------
drivers/mtd/nand/spi/toshiba.c | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------
drivers/mtd/nand/spi/winbond.c | 34 +++----------
include/linux/mtd/rawnand.h | 11 ++++-
include/linux/mtd/spinand.h | 67 +++++++++++++++++---------
32 files changed, 1482 insertions(+), 464 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/nand-macronix.txt
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
[GIT PULL] mtd: nand: Changes for 5.7
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [GIT PULL] mtd: nand: Changes for 5.7
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Date: Fri, 27 Mar 2020 21:22:38 +0100
- Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx, Vignesh Raghavendra <vigneshr@xxxxxx>, Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>, Tudor Ambarus <Tudor.Ambarus@xxxxxxxxxxxxx>
- Organization: Bootlin
- Follow-Ups:
- Re: [GIT PULL] mtd: nand: Changes for 5.7
- From: Miquel Raynal
- Re: [GIT PULL] mtd: nand: Changes for 5.7
- Prev by Date: Re: [PATCH 1/1] mtd/intel-spi: Support cmdline-based partition
- Next by Date: Re: [PATCH 1/1] mtd/intel-spi: Support cmdline-based partition
- Previous by thread: [PATCH v3] mtd: spi-nor: keep lock bits if they are non-volatile
- Next by thread: Re: [GIT PULL] mtd: nand: Changes for 5.7
- Index(es):
 |