On 3/24/20 2:27 PM, Marek Vasut wrote:
On 3/24/20 8:36 AM, Christophe Kerello wrote:
On 3/24/20 1:37 AM, Marek Vasut wrote:
On 3/23/20 3:58 PM, Christophe Kerello wrote:
The FMC2 functional block makes the interface with: synchronous and
asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
peripherals) and NAND flash memories.
Its main purposes are:
- to translate AXI transactions into the appropriate external device
protocol
- to meet the access time requirements of the external devices
All external devices share the addresses, data and control signals
with the
controller. Each external device is accessed by means of a unique Chip
Select. The FMC2 performs only one access at a time to an external
device.
Christophe Kerello (12):
dt-bindings: mfd: stm32-fmc2: add STM32 FMC2 controller documentation
mfd: stm32-fmc2: add STM32 FMC2 controller driver
bus: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
mtd: rawnand: stm32_fmc2: remove useless inline comments
mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
mtd: rawnand: stm32_fmc2: cleanup
mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
mtd: rawnand: stm32_fmc2: move all registers
mtd: rawnand: stm32_fmc2: use regmap APIs
mtd: rawnand: stm32_fmc2: use stm32_fmc2 structure in nfc controller
mtd: rawnand: stm32_fmc2: add new MP1 compatible string
This doesn't apply to either next or 5.6-rc7, do you have a tree
somewhere with those patches applied ?
Hi Marek,
Hi,
This implementation has been done on mtd/nand/next branch.
Of which tree ?
Hi Marek,
I am using https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git
Regards,
Christophe Kerello.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
