Re: [PATCH v3] mtd: rawnand: toshiba: Support actual bitflips for BENAND (Built-in ECC NAND)

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Yoshio,

Yoshio Furuyama <ytc-mb-yfuruyama7@xxxxxxxxxx> wrote on Wed, 11 Mar
2020 15:19:43 +0900:


The title is misleading, would it be better:

	"Support reading the number of bitflips" 

> Add support vendor specific commands for KIOXIA CORPORATION BENAND.
> The actual bitflips number can be get by this command.

                                    retrieved?

> 
> Signed-off-by: Yoshio Furuyama <ytc-mb-yfuruyama7@xxxxxxxxxx>
> ---
> changelog[v3]:Tested version.
> original patch:"[RFC,v2] mtd: nand: toshiba: Add support for ->exec_op()".
> 
>  drivers/mtd/nand/raw/nand_toshiba.c | 55 +++++++++++++++++++++++++++++++++++--
>  1 file changed, 53 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
> index 9c03fbb..10fcfbd 100644
> --- a/drivers/mtd/nand/raw/nand_toshiba.c
> +++ b/drivers/mtd/nand/raw/nand_toshiba.c
> @@ -14,14 +14,65 @@
>  /* Recommended to rewrite for BENAND */
>  #define TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED	BIT(3)
>  
> +/* ECC Status Read Command for BENAND */
> +#define TOSHIBA_NAND_CMD_ECC_STATUS_READ	0x7A
> +
> +/* ECC Status Mask for BENAND */
> +#define TOSHIBA_NAND_ECC_STATUS_MASK		0x0F
> +
> +/* Uncorrectable Error for BENAND */
> +#define TOSHIBA_NAND_ECC_STATUS_UNCORR		0x0F
> +
> +static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
> +						 u8 *buf)
> +{
> +	u8 *ecc_status = buf;
> +
> +	if (nand_has_exec_op(chip)) {
> +		const struct nand_sdr_timings *sdr =
> +			nand_get_sdr_timings(&chip->data_interface);
> +		struct nand_op_instr instrs[] = {
> +			NAND_OP_CMD(TOSHIBA_NAND_CMD_ECC_STATUS_READ,
> +				    PSEC_TO_NSEC(sdr->tADL_min)),
> +			NAND_OP_8BIT_DATA_IN(chip->ecc.steps, ecc_status, 0),
> +		};
> +		struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
> +
> +		return nand_exec_op(chip, &op);
> +	}
> +
> +	return -ENOTSUPP;
> +}
> +
>  static int toshiba_nand_benand_eccstatus(struct nand_chip *chip)
>  {
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	int ret;
>  	unsigned int max_bitflips = 0;
> -	u8 status;
> +	u8 status, ecc_status[8];

Shall we define this          ^ ?
It is strange to have the number of steps hardcoded this way.

>  
>  	/* Check Status */
> +	ret = toshiba_nand_benand_read_eccstatus_op(chip, ecc_status);
> +	if (!ret) {
> +		unsigned int i, bitflips = 0;
> +
> +		for (i = 0; i < chip->ecc.steps; i++) {
> +			bitflips = ecc_status[i] & TOSHIBA_NAND_ECC_STATUS_MASK;
> +			if (bitflips == TOSHIBA_NAND_ECC_STATUS_UNCORR) {
> +				mtd->ecc_stats.failed++;
> +			} else {
> +				mtd->ecc_stats.corrected += bitflips;
> +				max_bitflips = max(max_bitflips, bitflips);
> +			}
> +		}
> +
> +		return max_bitflips;
> +	}
> +
> +	/*
> +	 * Fallback to regular status check if
> +	 * toshiba_nand_benand_read_eccstatus_op() failed.
> +	 */
>  	ret = nand_status_op(chip, &status);
>  	if (ret)
>  		return ret;
> @@ -108,7 +159,7 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
>  	 */
>  	if (chip->id.len >= 6 && nand_is_slc(chip) &&
>  	    (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ &&
> -	    !(chip->id.data[4] & 0x80) /* !BENAND */) {
> +	    !(chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND) /* !BENAND */) {
>  		memorg->oobsize = 32 * memorg->pagesize >> 9;
>  		mtd->oobsize = memorg->oobsize;
>  	}

Looks fine otherwise.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/