From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> Cross manufacturer code is unlikely and discouraged, get rid of the MFR definitions. Suggested-by: Vignesh Raghavendra <vigneshr@xxxxxx> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> --- drivers/mtd/spi-nor/core.c | 2 -- include/linux/mtd/spi-nor.h | 17 ----------------- 2 files changed, 19 deletions(-) diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index baee58fd8b04..b07e66f10995 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -40,8 +40,6 @@ #define SPI_NOR_MAX_ADDR_WIDTH 4 -#define JEDEC_MFR(info) ((info)->id[0]) - /** * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data * transfer diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index bf37bfc68797..2f7725525460 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -11,23 +11,6 @@ #include <linux/mtd/mtd.h> #include <linux/spi/spi-mem.h> -/* - * Manufacturer IDs - * - * The first byte returned from the flash after sending opcode SPINOR_OP_RDID. - * Sometimes these are the same as CFI IDs, but sometimes they aren't. - */ -#define SNOR_MFR_ATMEL CFI_MFR_ATMEL -#define SNOR_MFR_GIGADEVICE 0xc8 -#define SNOR_MFR_INTEL CFI_MFR_INTEL -#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */ -#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */ -#define SNOR_MFR_ISSI CFI_MFR_PMC -#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX -#define SNOR_MFR_SPANSION CFI_MFR_AMD -#define SNOR_MFR_SST CFI_MFR_SST -#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */ - /* * Note on opcode nomenclature: some opcodes have a format like * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number -- 2.23.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/