On 02/03/20 11:37 pm, Tudor.Ambarus@xxxxxxxxxxxxx wrote:
> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
>
> The SPI NOR controllers drivers must not be able to use structures that
> are meant just for the SPI NOR core.
>
> struct spi_nor_flash_parameter is filled at run-time with info gathered
> from flash_info, manufacturer and sfdp data. struct spi_nor_flash_parameter
> should be opaque to the SPI NOR controller drivers, make sure it is.
>
> spi_nor_option_flags, spi_nor_read_command, spi_nor_pp_command,
> spi_nor_read_command_index and spi_nor_pp_command_index are defined for the
> core use, make sure they are opaque to the SPI NOR controller drivers.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Nice work!
Reviewed-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Should we drop SNOR_MFR_* macros as well or do you see a neeed for them?
> ---
> drivers/mtd/spi-nor/core.c | 86 ++++++----
> drivers/mtd/spi-nor/core.h | 214 +++++++++++++++++++++++++
> drivers/mtd/spi-nor/gigadevice.c | 2 +-
> drivers/mtd/spi-nor/issi.c | 2 +-
> drivers/mtd/spi-nor/macronix.c | 4 +-
> drivers/mtd/spi-nor/micron-st.c | 4 +-
> drivers/mtd/spi-nor/sfdp.c | 10 ++
> drivers/mtd/spi-nor/spansion.c | 2 +-
> drivers/mtd/spi-nor/winbond.c | 2 +-
> drivers/mtd/spi-nor/xilinx.c | 4 +-
> include/linux/mtd/spi-nor.h | 259 +------------------------------
> 11 files changed, 294 insertions(+), 295 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index a2e1917b608d..860dac1dff90 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -802,7 +802,7 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
> ret = spi_nor_read_cr(nor, &sr_cr[1]);
> if (ret)
> return ret;
> - } else if (nor->params.quad_enable) {
> + } else if (nor->params->quad_enable) {
> /*
> * If the Status Register 2 Read command (35h) is not
> * supported, we should at least be sure we don't
> @@ -810,7 +810,7 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
> *
> * We can safely assume that when the Quad Enable method is
> * set, the value of the QE bit is one, as a consequence of the
> - * nor->params.quad_enable() call.
> + * nor->params->quad_enable() call.
> *
> * We can safely assume that the Quad Enable bit is present in
> * the Status Register 2 at BIT(1). According to the JESD216
> @@ -1075,6 +1075,11 @@ static u8 spi_nor_convert_3to4_erase(u8 opcode)
> ARRAY_SIZE(spi_nor_3to4_erase));
> }
>
> +static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
> +{
> + return !!nor->params->erase_map.uniform_erase_type;
> +}
> +
> static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
> {
> nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
> @@ -1082,7 +1087,7 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
> nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
>
> if (!spi_nor_has_uniform_erase(nor)) {
> - struct spi_nor_erase_map *map = &nor->params.erase_map;
> + struct spi_nor_erase_map *map = &nor->params->erase_map;
> struct spi_nor_erase_type *erase;
> int i;
>
> @@ -1119,10 +1124,10 @@ void spi_nor_unlock_and_unprep(struct spi_nor *nor)
>
> static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
> {
> - if (!nor->params.convert_addr)
> + if (!nor->params->convert_addr)
> return addr;
>
> - return nor->params.convert_addr(nor, addr);
> + return nor->params->convert_addr(nor, addr);
> }
>
> /*
> @@ -1227,6 +1232,16 @@ spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
> return NULL;
> }
>
> +static u64 spi_nor_region_is_last(const struct spi_nor_erase_region *region)
> +{
> + return region->offset & SNOR_LAST_REGION;
> +}
> +
> +static u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
> +{
> + return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
> +}
> +
> /**
> * spi_nor_region_next() - get the next spi nor region
> * @region: pointer to a structure that describes a SPI NOR erase region
> @@ -1331,7 +1346,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
> struct list_head *erase_list,
> u64 addr, u32 len)
> {
> - const struct spi_nor_erase_map *map = &nor->params.erase_map;
> + const struct spi_nor_erase_map *map = &nor->params->erase_map;
> const struct spi_nor_erase_type *erase, *prev_erase = NULL;
> struct spi_nor_erase_region *region;
> struct spi_nor_erase_command *cmd = NULL;
> @@ -1817,7 +1832,7 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> if (ret)
> return ret;
>
> - ret = nor->params.locking_ops->lock(nor, ofs, len);
> + ret = nor->params->locking_ops->lock(nor, ofs, len);
>
> spi_nor_unlock_and_unprep(nor);
> return ret;
> @@ -1832,7 +1847,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> if (ret)
> return ret;
>
> - ret = nor->params.locking_ops->unlock(nor, ofs, len);
> + ret = nor->params->locking_ops->unlock(nor, ofs, len);
>
> spi_nor_unlock_and_unprep(nor);
> return ret;
> @@ -1847,7 +1862,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> if (ret)
> return ret;
>
> - ret = nor->params.locking_ops->is_locked(nor, ofs, len);
> + ret = nor->params->locking_ops->is_locked(nor, ofs, len);
>
> spi_nor_unlock_and_unprep(nor);
> return ret;
> @@ -2312,7 +2327,7 @@ static int spi_nor_spimem_check_pp(struct spi_nor *nor,
> static void
> spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
> {
> - struct spi_nor_flash_parameter *params = &nor->params;
> + struct spi_nor_flash_parameter *params = nor->params;
> unsigned int cap;
>
> /* DTR modes are not supported yet, mask them all. */
> @@ -2411,7 +2426,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
> if (cmd < 0)
> return -EINVAL;
>
> - read = &nor->params.reads[cmd];
> + read = &nor->params->reads[cmd];
> nor->read_opcode = read->opcode;
> nor->read_proto = read->proto;
>
> @@ -2442,7 +2457,7 @@ static int spi_nor_select_pp(struct spi_nor *nor,
> if (cmd < 0)
> return -EINVAL;
>
> - pp = &nor->params.page_programs[cmd];
> + pp = &nor->params->page_programs[cmd];
> nor->program_opcode = pp->opcode;
> nor->write_proto = pp->proto;
> return 0;
> @@ -2503,7 +2518,7 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
>
> static int spi_nor_select_erase(struct spi_nor *nor)
> {
> - struct spi_nor_erase_map *map = &nor->params.erase_map;
> + struct spi_nor_erase_map *map = &nor->params->erase_map;
> const struct spi_nor_erase_type *erase = NULL;
> struct mtd_info *mtd = &nor->mtd;
> u32 wanted_size = nor->info->sector_size;
> @@ -2552,7 +2567,7 @@ static int spi_nor_select_erase(struct spi_nor *nor)
> static int spi_nor_default_setup(struct spi_nor *nor,
> const struct spi_nor_hwcaps *hwcaps)
> {
> - struct spi_nor_flash_parameter *params = &nor->params;
> + struct spi_nor_flash_parameter *params = nor->params;
> u32 ignored_mask, shared_mask;
> int err;
>
> @@ -2613,10 +2628,10 @@ static int spi_nor_default_setup(struct spi_nor *nor,
> static int spi_nor_setup(struct spi_nor *nor,
> const struct spi_nor_hwcaps *hwcaps)
> {
> - if (!nor->params.setup)
> + if (!nor->params->setup)
> return 0;
>
> - return nor->params.setup(nor, hwcaps);
> + return nor->params->setup(nor, hwcaps);
> }
>
> /**
> @@ -2646,13 +2661,13 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
> {
> struct spi_nor_flash_parameter sfdp_params;
>
> - memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params));
> + memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
>
> if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
> nor->addr_width = 0;
> nor->flags &= ~SNOR_F_4B_OPCODES;
> } else {
> - memcpy(&nor->params, &sfdp_params, sizeof(nor->params));
> + memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
> }
> }
>
> @@ -2663,7 +2678,7 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
> */
> static void spi_nor_info_init_params(struct spi_nor *nor)
> {
> - struct spi_nor_flash_parameter *params = &nor->params;
> + struct spi_nor_flash_parameter *params = nor->params;
> struct spi_nor_erase_map *map = ¶ms->erase_map;
> const struct flash_info *info = nor->info;
> struct device_node *np = spi_nor_get_flash_node(nor);
> @@ -2782,8 +2797,8 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
> * NOR protection support. When locking_ops are not provided, we pick
> * the default ones.
> */
> - if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops)
> - nor->params.locking_ops = &spi_nor_sr_locking_ops;
> + if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
> + nor->params->locking_ops = &spi_nor_sr_locking_ops;
> }
>
> /**
> @@ -2823,8 +2838,12 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
> * ->default_init() hook or the SFDP parser do not set specific params.
> * spi_nor_late_init_params()
> */
> -static void spi_nor_init_params(struct spi_nor *nor)
> +static int spi_nor_init_params(struct spi_nor *nor)
> {
> + nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
> + if (!nor->params)
> + return -ENOMEM;
> +
> spi_nor_info_init_params(nor);
>
> spi_nor_manufacturer_init_params(nor);
> @@ -2836,6 +2855,8 @@ static void spi_nor_init_params(struct spi_nor *nor)
> spi_nor_post_sfdp_fixups(nor);
>
> spi_nor_late_init_params(nor);
> +
> + return 0;
> }
>
> /**
> @@ -2846,14 +2867,14 @@ static void spi_nor_init_params(struct spi_nor *nor)
> */
> static int spi_nor_quad_enable(struct spi_nor *nor)
> {
> - if (!nor->params.quad_enable)
> + if (!nor->params->quad_enable)
> return 0;
>
> if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> spi_nor_get_protocol_width(nor->write_proto) == 4))
> return 0;
>
> - return nor->params.quad_enable(nor);
> + return nor->params->quad_enable(nor);
> }
>
> /**
> @@ -2868,7 +2889,7 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
> static int spi_nor_unlock_all(struct spi_nor *nor)
> {
> if (nor->flags & SNOR_F_HAS_LOCK)
> - return spi_nor_unlock(&nor->mtd, 0, nor->params.size);
> + return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
>
> return 0;
> }
> @@ -2899,7 +2920,7 @@ static int spi_nor_init(struct spi_nor *nor)
> */
> WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
> "enabling reset hack; may not recover from unexpected reboots\n");
> - nor->params.set_4byte(nor, true);
> + nor->params->set_4byte(nor, true);
> }
>
> return 0;
> @@ -2923,7 +2944,7 @@ void spi_nor_restore(struct spi_nor *nor)
> /* restore the addressing mode */
> if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
> nor->flags & SNOR_F_BROKEN_RESET)
> - nor->params.set_4byte(nor, false);
> + nor->params->set_4byte(nor, false);
> }
> EXPORT_SYMBOL_GPL(spi_nor_restore);
>
> @@ -3028,7 +3049,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> struct device *dev = nor->dev;
> struct mtd_info *mtd = &nor->mtd;
> struct device_node *np = spi_nor_get_flash_node(nor);
> - struct spi_nor_flash_parameter *params = &nor->params;
> int ret;
> int i;
>
> @@ -3079,7 +3099,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> mtd->_write = spi_nor_write;
>
> /* Init flash parameters based on flash_info struct and SFDP */
> - spi_nor_init_params(nor);
> + ret = spi_nor_init_params(nor);
> + if (ret)
> + return ret;
>
> if (!mtd->name)
> mtd->name = dev_name(dev);
> @@ -3087,12 +3109,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> mtd->type = MTD_NORFLASH;
> mtd->writesize = 1;
> mtd->flags = MTD_CAP_NORFLASH;
> - mtd->size = params->size;
> + mtd->size = nor->params->size;
> mtd->_erase = spi_nor_erase;
> mtd->_read = spi_nor_read;
> mtd->_resume = spi_nor_resume;
>
> - if (nor->params.locking_ops) {
> + if (nor->params->locking_ops) {
> mtd->_lock = spi_nor_lock;
> mtd->_unlock = spi_nor_unlock;
> mtd->_is_locked = spi_nor_is_locked;
> @@ -3115,7 +3137,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> mtd->flags |= MTD_NO_ERASE;
>
> mtd->dev.parent = dev;
> - nor->page_size = params->page_size;
> + nor->page_size = nor->params->page_size;
> mtd->writebufsize = nor->page_size;
>
> if (of_property_read_bool(np, "broken-flash-reset"))
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 3541a84c03d8..7654b6f3b966 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -11,6 +11,220 @@
>
> #define SPI_NOR_MAX_ID_LEN 6
>
> +enum spi_nor_option_flags {
> + SNOR_F_USE_FSR = BIT(0),
> + SNOR_F_HAS_SR_TB = BIT(1),
> + SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
> + SNOR_F_READY_XSR_RDY = BIT(3),
> + SNOR_F_USE_CLSR = BIT(4),
> + SNOR_F_BROKEN_RESET = BIT(5),
> + SNOR_F_4B_OPCODES = BIT(6),
> + SNOR_F_HAS_4BAIT = BIT(7),
> + SNOR_F_HAS_LOCK = BIT(8),
> + SNOR_F_HAS_16BIT_SR = BIT(9),
> + SNOR_F_NO_READ_CR = BIT(10),
> + SNOR_F_HAS_SR_TB_BIT6 = BIT(11),
> +};
> +
> +struct spi_nor_read_command {
> + u8 num_mode_clocks;
> + u8 num_wait_states;
> + u8 opcode;
> + enum spi_nor_protocol proto;
> +};
> +
> +struct spi_nor_pp_command {
> + u8 opcode;
> + enum spi_nor_protocol proto;
> +};
> +
> +enum spi_nor_read_command_index {
> + SNOR_CMD_READ,
> + SNOR_CMD_READ_FAST,
> + SNOR_CMD_READ_1_1_1_DTR,
> +
> + /* Dual SPI */
> + SNOR_CMD_READ_1_1_2,
> + SNOR_CMD_READ_1_2_2,
> + SNOR_CMD_READ_2_2_2,
> + SNOR_CMD_READ_1_2_2_DTR,
> +
> + /* Quad SPI */
> + SNOR_CMD_READ_1_1_4,
> + SNOR_CMD_READ_1_4_4,
> + SNOR_CMD_READ_4_4_4,
> + SNOR_CMD_READ_1_4_4_DTR,
> +
> + /* Octal SPI */
> + SNOR_CMD_READ_1_1_8,
> + SNOR_CMD_READ_1_8_8,
> + SNOR_CMD_READ_8_8_8,
> + SNOR_CMD_READ_1_8_8_DTR,
> +
> + SNOR_CMD_READ_MAX
> +};
> +
> +enum spi_nor_pp_command_index {
> + SNOR_CMD_PP,
> +
> + /* Quad SPI */
> + SNOR_CMD_PP_1_1_4,
> + SNOR_CMD_PP_1_4_4,
> + SNOR_CMD_PP_4_4_4,
> +
> + /* Octal SPI */
> + SNOR_CMD_PP_1_1_8,
> + SNOR_CMD_PP_1_8_8,
> + SNOR_CMD_PP_8_8_8,
> +
> + SNOR_CMD_PP_MAX
> +};
> +
> +/**
> + * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
> + * @size: the size of the sector/block erased by the erase type.
> + * JEDEC JESD216B imposes erase sizes to be a power of 2.
> + * @size_shift: @size is a power of 2, the shift is stored in
> + * @size_shift.
> + * @size_mask: the size mask based on @size_shift.
> + * @opcode: the SPI command op code to erase the sector/block.
> + * @idx: Erase Type index as sorted in the Basic Flash Parameter
> + * Table. It will be used to synchronize the supported
> + * Erase Types with the ones identified in the SFDP
> + * optional tables.
> + */
> +struct spi_nor_erase_type {
> + u32 size;
> + u32 size_shift;
> + u32 size_mask;
> + u8 opcode;
> + u8 idx;
> +};
> +
> +/**
> + * struct spi_nor_erase_command - Used for non-uniform erases
> + * The structure is used to describe a list of erase commands to be executed
> + * once we validate that the erase can be performed. The elements in the list
> + * are run-length encoded.
> + * @list: for inclusion into the list of erase commands.
> + * @count: how many times the same erase command should be
> + * consecutively used.
> + * @size: the size of the sector/block erased by the command.
> + * @opcode: the SPI command op code to erase the sector/block.
> + */
> +struct spi_nor_erase_command {
> + struct list_head list;
> + u32 count;
> + u32 size;
> + u8 opcode;
> +};
> +
> +/**
> + * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
> + * @offset: the offset in the data array of erase region start.
> + * LSB bits are used as a bitmask encoding flags to
> + * determine if this region is overlaid, if this region is
> + * the last in the SPI NOR flash memory and to indicate
> + * all the supported erase commands inside this region.
> + * The erase types are sorted in ascending order with the
> + * smallest Erase Type size being at BIT(0).
> + * @size: the size of the region in bytes.
> + */
> +struct spi_nor_erase_region {
> + u64 offset;
> + u64 size;
> +};
> +
> +#define SNOR_ERASE_TYPE_MAX 4
> +#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
> +
> +#define SNOR_LAST_REGION BIT(4)
> +#define SNOR_OVERLAID_REGION BIT(5)
> +
> +#define SNOR_ERASE_FLAGS_MAX 6
> +#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
> +
> +/**
> + * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
> + * @regions: array of erase regions. The regions are consecutive in
> + * address space. Walking through the regions is done
> + * incrementally.
> + * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform
> + * sector size (legacy implementation).
> + * @erase_type: an array of erase types shared by all the regions.
> + * The erase types are sorted in ascending order, with the
> + * smallest Erase Type size being the first member in the
> + * erase_type array.
> + * @uniform_erase_type: bitmask encoding erase types that can erase the
> + * entire memory. This member is completed at init by
> + * uniform and non-uniform SPI NOR flash memories if they
> + * support at least one erase type that can erase the
> + * entire memory.
> + */
> +struct spi_nor_erase_map {
> + struct spi_nor_erase_region *regions;
> + struct spi_nor_erase_region uniform_region;
> + struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX];
> + u8 uniform_erase_type;
> +};
> +
> +/**
> + * struct spi_nor_locking_ops - SPI NOR locking methods
> + * @lock: lock a region of the SPI NOR.
> + * @unlock: unlock a region of the SPI NOR.
> + * @is_locked: check if a region of the SPI NOR is completely locked
> + */
> +struct spi_nor_locking_ops {
> + int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> + int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> + int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> +};
> +
> +/**
> + * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
> + * Includes legacy flash parameters and settings that can be overwritten
> + * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
> + * Serial Flash Discoverable Parameters (SFDP) tables.
> + *
> + * @size: the flash memory density in bytes.
> + * @page_size: the page size of the SPI NOR flash memory.
> + * @hwcaps: describes the read and page program hardware
> + * capabilities.
> + * @reads: read capabilities ordered by priority: the higher index
> + * in the array, the higher priority.
> + * @page_programs: page program capabilities ordered by priority: the
> + * higher index in the array, the higher priority.
> + * @erase_map: the erase map parsed from the SFDP Sector Map Parameter
> + * Table.
> + * @quad_enable: enables SPI NOR quad mode.
> + * @set_4byte: puts the SPI NOR in 4 byte addressing mode.
> + * @convert_addr: converts an absolute address into something the flash
> + * will understand. Particularly useful when pagesize is
> + * not a power-of-2.
> + * @setup: configures the SPI NOR memory. Useful for SPI NOR
> + * flashes that have peculiarities to the SPI NOR standard
> + * e.g. different opcodes, specific address calculation,
> + * page size, etc.
> + * @locking_ops: SPI NOR locking methods.
> + */
> +struct spi_nor_flash_parameter {
> + u64 size;
> + u32 page_size;
> +
> + struct spi_nor_hwcaps hwcaps;
> + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
> + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
> +
> + struct spi_nor_erase_map erase_map;
> +
> + int (*quad_enable)(struct spi_nor *nor);
> + int (*set_4byte)(struct spi_nor *nor, bool enable);
> + u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
> + int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
> +
> + const struct spi_nor_locking_ops *locking_ops;
> +};
> +
> /**
> * struct spi_nor_fixups - SPI NOR fixup hooks
> * @default_init: called after default flash parameters init. Used to tweak
> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
> index 7930e4490dab..447d84bb2128 100644
> --- a/drivers/mtd/spi-nor/gigadevice.c
> +++ b/drivers/mtd/spi-nor/gigadevice.c
> @@ -16,7 +16,7 @@ static void gd25q256_default_init(struct spi_nor *nor)
> * indicate the quad_enable method for this case, we need
> * to set it in the default_init fixup hook.
> */
> - nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
> + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
> }
>
> static struct spi_nor_fixups gd25q256_fixups = {
> diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> index 3a1c34c41388..ffcb60e54a80 100644
> --- a/drivers/mtd/spi-nor/issi.c
> +++ b/drivers/mtd/spi-nor/issi.c
> @@ -68,7 +68,7 @@ static const struct flash_info issi_parts[] = {
>
> static void issi_default_init(struct spi_nor *nor)
> {
> - nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
> + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
> }
>
> static const struct spi_nor_fixups issi_fixups = {
> diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
> index 1ae609c44676..d73bd0363144 100644
> --- a/drivers/mtd/spi-nor/macronix.c
> +++ b/drivers/mtd/spi-nor/macronix.c
> @@ -82,8 +82,8 @@ static const struct flash_info macronix_parts[] = {
>
> static void macronix_default_init(struct spi_nor *nor)
> {
> - nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
> - nor->params.set_4byte = spi_nor_en4_ex4_set_4byte;
> + nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
> + nor->params->set_4byte = spi_nor_en4_ex4_set_4byte;
> }
>
> static const struct spi_nor_fixups macronix_fixups = {
> diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
> index 8017ca58b3a5..5be817d2f27c 100644
> --- a/drivers/mtd/spi-nor/micron-st.c
> +++ b/drivers/mtd/spi-nor/micron-st.c
> @@ -106,8 +106,8 @@ static void micron_st_default_init(struct spi_nor *nor)
> {
> nor->flags |= SNOR_F_HAS_LOCK;
> nor->flags &= ~SNOR_F_HAS_16BIT_SR;
> - nor->params.quad_enable = NULL;
> - nor->params.set_4byte = spi_nor_en4_ex4_wen_set_4byte;
> + nor->params->quad_enable = NULL;
> + nor->params->set_4byte = spi_nor_en4_ex4_wen_set_4byte;
> }
>
> static const struct spi_nor_fixups micron_st_fixups = {
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index b790c3ec871f..6829dc7e4f74 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -734,6 +734,16 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
> return ret;
> }
>
> +static void spi_nor_region_mark_end(struct spi_nor_erase_region *region)
> +{
> + region->offset |= SNOR_LAST_REGION;
> +}
> +
> +static void spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
> +{
> + region->offset |= SNOR_OVERLAID_REGION;
> +}
> +
> /**
> * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
> * @region: pointer to a structure that describes a SPI NOR erase region
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index 16683983a20e..6756202ace4b 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -74,7 +74,7 @@ static const struct flash_info spansion_parts[] = {
>
> static void spansion_post_sfdp_fixups(struct spi_nor *nor)
> {
> - if (nor->params.size <= SZ_16M)
> + if (nor->params->size <= SZ_16M)
> return;
>
> nor->flags |= SNOR_F_4B_OPCODES;
> diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
> index 1e77dffbf729..f15be50024d1 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -97,7 +97,7 @@ static int winbond_set_4byte(struct spi_nor *nor, bool enable)
>
> static void winbond_default_init(struct spi_nor *nor)
> {
> - nor->params.set_4byte = winbond_set_4byte;
> + nor->params->set_4byte = winbond_set_4byte;
> }
>
> static const struct spi_nor_fixups winbond_fixups = {
> diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
> index fcf635d89f65..1138bdbf4199 100644
> --- a/drivers/mtd/spi-nor/xilinx.c
> +++ b/drivers/mtd/spi-nor/xilinx.c
> @@ -70,7 +70,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
> nor->mtd.erasesize = 8 * nor->page_size;
> } else {
> /* Flash in Default addressing mode */
> - nor->params.convert_addr = s3an_convert_addr;
> + nor->params->convert_addr = s3an_convert_addr;
> nor->mtd.erasesize = nor->info->sector_size;
> }
>
> @@ -79,7 +79,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
>
> static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
> {
> - nor->params.setup = xilinx_nor_setup;
> + nor->params->setup = xilinx_nor_setup;
> }
>
> static const struct spi_nor_fixups xilinx_fixups = {
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index dde2988a809e..d3d34c4eea48 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -227,110 +227,6 @@ static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
> return spi_nor_get_protocol_data_nbits(proto);
> }
>
> -enum spi_nor_option_flags {
> - SNOR_F_USE_FSR = BIT(0),
> - SNOR_F_HAS_SR_TB = BIT(1),
> - SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
> - SNOR_F_READY_XSR_RDY = BIT(3),
> - SNOR_F_USE_CLSR = BIT(4),
> - SNOR_F_BROKEN_RESET = BIT(5),
> - SNOR_F_4B_OPCODES = BIT(6),
> - SNOR_F_HAS_4BAIT = BIT(7),
> - SNOR_F_HAS_LOCK = BIT(8),
> - SNOR_F_HAS_16BIT_SR = BIT(9),
> - SNOR_F_NO_READ_CR = BIT(10),
> - SNOR_F_HAS_SR_TB_BIT6 = BIT(11),
> -
> -};
> -
> -/**
> - * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
> - * @size: the size of the sector/block erased by the erase type.
> - * JEDEC JESD216B imposes erase sizes to be a power of 2.
> - * @size_shift: @size is a power of 2, the shift is stored in
> - * @size_shift.
> - * @size_mask: the size mask based on @size_shift.
> - * @opcode: the SPI command op code to erase the sector/block.
> - * @idx: Erase Type index as sorted in the Basic Flash Parameter
> - * Table. It will be used to synchronize the supported
> - * Erase Types with the ones identified in the SFDP
> - * optional tables.
> - */
> -struct spi_nor_erase_type {
> - u32 size;
> - u32 size_shift;
> - u32 size_mask;
> - u8 opcode;
> - u8 idx;
> -};
> -
> -/**
> - * struct spi_nor_erase_command - Used for non-uniform erases
> - * The structure is used to describe a list of erase commands to be executed
> - * once we validate that the erase can be performed. The elements in the list
> - * are run-length encoded.
> - * @list: for inclusion into the list of erase commands.
> - * @count: how many times the same erase command should be
> - * consecutively used.
> - * @size: the size of the sector/block erased by the command.
> - * @opcode: the SPI command op code to erase the sector/block.
> - */
> -struct spi_nor_erase_command {
> - struct list_head list;
> - u32 count;
> - u32 size;
> - u8 opcode;
> -};
> -
> -/**
> - * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
> - * @offset: the offset in the data array of erase region start.
> - * LSB bits are used as a bitmask encoding flags to
> - * determine if this region is overlaid, if this region is
> - * the last in the SPI NOR flash memory and to indicate
> - * all the supported erase commands inside this region.
> - * The erase types are sorted in ascending order with the
> - * smallest Erase Type size being at BIT(0).
> - * @size: the size of the region in bytes.
> - */
> -struct spi_nor_erase_region {
> - u64 offset;
> - u64 size;
> -};
> -
> -#define SNOR_ERASE_TYPE_MAX 4
> -#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
> -
> -#define SNOR_LAST_REGION BIT(4)
> -#define SNOR_OVERLAID_REGION BIT(5)
> -
> -#define SNOR_ERASE_FLAGS_MAX 6
> -#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
> -
> -/**
> - * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
> - * @regions: array of erase regions. The regions are consecutive in
> - * address space. Walking through the regions is done
> - * incrementally.
> - * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform
> - * sector size (legacy implementation).
> - * @erase_type: an array of erase types shared by all the regions.
> - * The erase types are sorted in ascending order, with the
> - * smallest Erase Type size being the first member in the
> - * erase_type array.
> - * @uniform_erase_type: bitmask encoding erase types that can erase the
> - * entire memory. This member is completed at init by
> - * uniform and non-uniform SPI NOR flash memories if they
> - * support at least one erase type that can erase the
> - * entire memory.
> - */
> -struct spi_nor_erase_map {
> - struct spi_nor_erase_region *regions;
> - struct spi_nor_erase_region uniform_region;
> - struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX];
> - u8 uniform_erase_type;
> -};
> -
> /**
> * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
> * supported by the SPI controller (bus master).
> @@ -406,61 +302,7 @@ struct spi_nor_hwcaps {
> #define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
> SNOR_HWCAPS_PP_MASK)
>
> -struct spi_nor_read_command {
> - u8 num_mode_clocks;
> - u8 num_wait_states;
> - u8 opcode;
> - enum spi_nor_protocol proto;
> -};
> -
> -struct spi_nor_pp_command {
> - u8 opcode;
> - enum spi_nor_protocol proto;
> -};
> -
> -enum spi_nor_read_command_index {
> - SNOR_CMD_READ,
> - SNOR_CMD_READ_FAST,
> - SNOR_CMD_READ_1_1_1_DTR,
> -
> - /* Dual SPI */
> - SNOR_CMD_READ_1_1_2,
> - SNOR_CMD_READ_1_2_2,
> - SNOR_CMD_READ_2_2_2,
> - SNOR_CMD_READ_1_2_2_DTR,
> -
> - /* Quad SPI */
> - SNOR_CMD_READ_1_1_4,
> - SNOR_CMD_READ_1_4_4,
> - SNOR_CMD_READ_4_4_4,
> - SNOR_CMD_READ_1_4_4_DTR,
> -
> - /* Octal SPI */
> - SNOR_CMD_READ_1_1_8,
> - SNOR_CMD_READ_1_8_8,
> - SNOR_CMD_READ_8_8_8,
> - SNOR_CMD_READ_1_8_8_DTR,
> -
> - SNOR_CMD_READ_MAX
> -};
> -
> -enum spi_nor_pp_command_index {
> - SNOR_CMD_PP,
> -
> - /* Quad SPI */
> - SNOR_CMD_PP_1_1_4,
> - SNOR_CMD_PP_1_4_4,
> - SNOR_CMD_PP_4_4_4,
> -
> - /* Octal SPI */
> - SNOR_CMD_PP_1_1_8,
> - SNOR_CMD_PP_1_8_8,
> - SNOR_CMD_PP_8_8_8,
> -
> - SNOR_CMD_PP_MAX
> -};
> -
> -/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
> +/* Forward declaration that is used in 'struct spi_nor_controller_ops' */
> struct spi_nor;
>
> /**
> @@ -491,74 +333,14 @@ struct spi_nor_controller_ops {
> int (*erase)(struct spi_nor *nor, loff_t offs);
> };
>
> -/**
> - * struct spi_nor_locking_ops - SPI NOR locking methods
> - * @lock: lock a region of the SPI NOR.
> - * @unlock: unlock a region of the SPI NOR.
> - * @is_locked: check if a region of the SPI NOR is completely locked
> - */
> -struct spi_nor_locking_ops {
> - int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> - int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> - int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> -};
> -
> -/**
> - * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
> - * Includes legacy flash parameters and settings that can be overwritten
> - * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
> - * Serial Flash Discoverable Parameters (SFDP) tables.
> - *
> - * @size: the flash memory density in bytes.
> - * @page_size: the page size of the SPI NOR flash memory.
> - * @hwcaps: describes the read and page program hardware
> - * capabilities.
> - * @reads: read capabilities ordered by priority: the higher index
> - * in the array, the higher priority.
> - * @page_programs: page program capabilities ordered by priority: the
> - * higher index in the array, the higher priority.
> - * @erase_map: the erase map parsed from the SFDP Sector Map Parameter
> - * Table.
> - * @quad_enable: enables SPI NOR quad mode.
> - * @set_4byte: puts the SPI NOR in 4 byte addressing mode.
> - * @convert_addr: converts an absolute address into something the flash
> - * will understand. Particularly useful when pagesize is
> - * not a power-of-2.
> - * @setup: configures the SPI NOR memory. Useful for SPI NOR
> - * flashes that have peculiarities to the SPI NOR standard
> - * e.g. different opcodes, specific address calculation,
> - * page size, etc.
> - * @locking_ops: SPI NOR locking methods.
> - */
> -struct spi_nor_flash_parameter {
> - u64 size;
> - u32 page_size;
> -
> - struct spi_nor_hwcaps hwcaps;
> - struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
> - struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
>
> - struct spi_nor_erase_map erase_map;
> -
> - int (*quad_enable)(struct spi_nor *nor);
> - int (*set_4byte)(struct spi_nor *nor, bool enable);
> - u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
> - int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
> -
> - const struct spi_nor_locking_ops *locking_ops;
> -};
> -
> -/**
> - * struct flash_info - Forward declaration of a structure used internally by
> - * spi_nor_scan()
> +/*
> + * Forward declarations that are used internally by the core and manufacturer
> + * drivers.
> */
> struct flash_info;
> -
> -/**
> - * struct spi_nor_manufacturer - Forward declaration of a structure used
> - * internally by the core and manufacturer drivers.
> - */
> struct spi_nor_manufacturer;
> +struct spi_nor_flash_parameter;
>
> /**
> * struct spi_nor - Structure for defining a the SPI NOR layer
> @@ -613,7 +395,7 @@ struct spi_nor {
>
> const struct spi_nor_controller_ops *controller_ops;
>
> - struct spi_nor_flash_parameter params;
> + struct spi_nor_flash_parameter *params;
>
> struct {
> struct spi_mem_dirmap_desc *rdesc;
> @@ -623,35 +405,6 @@ struct spi_nor {
> void *priv;
> };
>
> -static u64 __maybe_unused
> -spi_nor_region_is_last(const struct spi_nor_erase_region *region)
> -{
> - return region->offset & SNOR_LAST_REGION;
> -}
> -
> -static u64 __maybe_unused
> -spi_nor_region_end(const struct spi_nor_erase_region *region)
> -{
> - return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
> -}
> -
> -static void __maybe_unused
> -spi_nor_region_mark_end(struct spi_nor_erase_region *region)
> -{
> - region->offset |= SNOR_LAST_REGION;
> -}
> -
> -static void __maybe_unused
> -spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
> -{
> - region->offset |= SNOR_OVERLAID_REGION;
> -}
> -
> -static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
> -{
> - return !!nor->params.erase_map.uniform_erase_type;
> -}
> -
> static inline void spi_nor_set_flash_node(struct spi_nor *nor,
> struct device_node *np)
> {
>
--
Regards
Vignesh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Date: Fri, 13 Mar 2020 13:43:17 +0530
- Cc: kstewart@xxxxxxxxxxxxxxxxxxx, alexandre.belloni@xxxxxxxxxxx, linux-aspeed@xxxxxxxxxxxxxxxx, thor.thayer@xxxxxxxxxxxxxxx, jethro@xxxxxxxxxxxx, rfontana@xxxxxxxxxx, miquel.raynal@xxxxxxxxxxx, opensource@xxxxxxxxxxx, richard@xxxxxx, michal.simek@xxxxxxxxxx, Ludovic.Desroches@xxxxxxxxxxxxx, joel@xxxxxxxxx, nishkadg.linux@xxxxxxxxx, john.garry@xxxxxxxxxx, vz@xxxxxxxxx, alexander.sverdlin@xxxxxxxxx, matthias.bgg@xxxxxxxxx, tglx@xxxxxxxxxxxxx, swboyd@xxxxxxxxxxxx, mika.westerberg@xxxxxxxxxxxxxxx, allison@xxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, andrew@xxxxxxxx, Nicolas.Ferre@xxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, dinguyen@xxxxxxxxxx, michael@xxxxxxxx, ludovic.barre@xxxxxx, linux-mediatek@xxxxxxxxxxxxxxxxxxx, info@xxxxxxxxx
- In-reply-to: <20200302180730.1886678-24-tudor.ambarus@microchip.com>
- References: <20200302180730.1886678-1-tudor.ambarus@microchip.com> <20200302180730.1886678-24-tudor.ambarus@microchip.com>
- User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.4.2
- Follow-Ups:
- Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- From: Tudor.Ambarus
- Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- References:
- [PATCH 00/23] mtd: spi-nor: Move manufacturer/SFDP code out of the core
- From: Tudor.Ambarus
- [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- From: Tudor.Ambarus
- [PATCH 00/23] mtd: spi-nor: Move manufacturer/SFDP code out of the core
- Prev by Date: Re: [PATCH 04/23] mtd: spi-nor: Expose stuctures and functions to manufacturer drivers
- Next by Date: Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- Previous by thread: Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- Next by thread: Re: [PATCH 23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
- Index(es):
 |