RE: [EXT] [PATCH v6 0/6] Add new series Micron SPI NAND devices

["Shivamurthy Shastri (sshivamurthy)" <sshivamurthy@xxxxxxxxxx>]

Hi Miquel,

I have rebased these patches to v5.6-rc1 as you suggested.
Please let me know, if there is still a problem.

Thanks,
Shiva

> 
> From: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
> 
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.
> 
> M78A:
> [1] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> [2] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> 
> M79A:
> [3] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> [4] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> 
> M70A:
> [5] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> [6] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> [7] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> [8] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> 
> Changes since v5:
> -----------------
> 
> 1. Rebased series to v5.6-rc1.
> 
> Changes since v4:
> -----------------
> 
> 1. Patch 2 is separated into two as per the comment by Boris.
> 2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
> 3. Reworked die selection function as per the comment by Boris.
> 
> Changes since v3:
> -----------------
> 
> 1. Patch 3 and 4 reworked as follows
>    - Patch 3 introducing the Continuous read feature
>    - Patch 4 adding devices with the feature
> 
> Changes since v2:
> -----------------
> 
> 1. Patch commit messages have been modified.
> 2. Handled devices with Continuous Read feature with vendor specific flag.
> 3. Reworked die selection function as per the comment.
> 
> Changes since v1:
> -----------------
> 
> 1. The patch split into multiple patches.
> 2. Added comments for selecting the die.
> 
> Shivamurthy Shastri (6):
>   mtd: spinand: micron: Generalize the OOB layout structure and function
>     names
>   mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
>   mtd: spinand: micron: Add new Micron SPI NAND devices
>   mtd: spinand: micron: identify SPI NAND device with Continuous Read
>     mode
>   mtd: spinand: micron: Add M70A series Micron SPI NAND devices
>   mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
>     dies
> 
>  drivers/mtd/nand/spi/micron.c | 150
> ++++++++++++++++++++++++++++++----
>  include/linux/mtd/spinand.h   |   1 +
>  2 files changed, 137 insertions(+), 14 deletions(-)
> 
> --
> 2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/