In spinand_markbad() we use spinand->oobbuf as a bad block marker, fill it with zeroes and issue spinand_write_page() operation: struct nand_page_io_req req = { .pos = *pos, .ooboffs = 0, .ooblen = 2, .oobbuf.out = spinand->oobbuf, }; ... memset(spinand->oobbuf, 0, 2); return spinand_write_page(spinand, &req); spinand_write_page() will call spinand_write_to_cache_op() at some moment. In spinand_write_to_cache_op() we have: nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand); memset(spinand->databuf, 0xff, nbytes); This will fill spinand->databuf with 0xff, but spinand->oobbuf is the part of spinand->databuf (see spinand_init()): spinand->oobbuf = spinand->databuf + nanddev_page_size(nand); As result bad block marker will be overwrited by 0xff values, hence bad block will NOT be marked. A separate buffer for bad block marker used to fix this issue. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@xxxxxxxxxxxx> --- drivers/mtd/nand/spi/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index bb4eac400b0f..d1355773d484 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -603,11 +603,12 @@ static int spinand_mtd_block_isbad(struct mtd_info *mtd, loff_t offs) static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos) { struct spinand_device *spinand = nand_to_spinand(nand); + char bad_block_marker[2] = {0, 0}; struct nand_page_io_req req = { .pos = *pos, .ooboffs = 0, - .ooblen = 2, - .oobbuf.out = spinand->oobbuf, + .ooblen = sizeof(bad_block_marker), + .oobbuf.out = bad_block_marker, }; int ret; u8 status; @@ -630,7 +631,6 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos) if (ret) return ret; - memset(spinand->oobbuf, 0, 2); return spinand_write_page(spinand, &req); } -- 2.25.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/