Commit 7c779cf7c1f7 ("mtd: rawnand: ingenic: Allow to compile test the new Ingenic driver") dropped the dependency on JZ4780_NEMC when COMPILE_TEST was set, which is wrong, as the driver requires symbols provided by the jz4780-nemc driver. Change the dependency to (MIPS || COMPILE_TEST) && JZ4780_NEMC to address the issue. Fixes: 7c779cf7c1f7 ("mtd: rawnand: ingenic: Allow to compile test the new Ingenic driver") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- drivers/mtd/nand/raw/ingenic/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig index 485abfa3f80b..96c5ae8b1bbc 100644 --- a/drivers/mtd/nand/raw/ingenic/Kconfig +++ b/drivers/mtd/nand/raw/ingenic/Kconfig @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only config MTD_NAND_JZ4780 tristate "JZ4780 NAND controller" - depends on JZ4780_NEMC || COMPILE_TEST + depends on MIPS || COMPILE_TEST + depends on JZ4780_NEMC help Enables support for NAND Flash connected to the NEMC on JZ4780 SoC based boards, using the BCH controller for hardware error correction. -- 2.25.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/