RE: [EXT] Re: [PATCH v4 2/5] mtd: spinand: micron: Add new Micron SPI NAND devices

["Shivamurthy Shastri (sshivamurthy)" <sshivamurthy@xxxxxxxxxx>]

Hi Boris,

Thanks for the review.

> 
> On Thu,  6 Feb 2020 21:22:03 +0100
> shiva.linuxworks@xxxxxxxxx wrote:
> 
> > From: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
> >
> > Add device table for M79A and M78A series Micron SPI NAND devices.
> >
> > Signed-off-by: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
> > ---
> >  drivers/mtd/nand/spi/micron.c | 31
> +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >
> > diff --git a/drivers/mtd/nand/spi/micron.c
> b/drivers/mtd/nand/spi/micron.c
> > index c028d0d7e236..5fd1f921ef12 100644
> > --- a/drivers/mtd/nand/spi/micron.c
> > +++ b/drivers/mtd/nand/spi/micron.c
> > @@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct
> spinand_device *spinand,
> >  }
> >
> >  static const struct spinand_info micron_spinand_table[] = {
> > +	/* M79A 2Gb 3.3V */
> 
> Should be added in a separate patch.

Okay, I will create separate patch for each device.

> 
> >  	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
> >  		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
> >  		     NAND_ECCREQ(8, 512),
> > @@ -100,6 +101,36 @@ static const struct spinand_info
> micron_spinand_table[] = {
> >  		     0,
> >  		     SPINAND_ECCINFO(&micron_8_ooblayout,
> >  				     micron_8_ecc_get_status)),
> > +	/* M79A 2Gb 1.8V */
> > +	SPINAND_INFO("MT29F2G01ABBGD", 0x25,
> > +		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
> > +		     NAND_ECCREQ(8, 512),
> > +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > +					      &write_cache_variants,
> > +					      &update_cache_variants),
> > +		     0,
> > +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> > +				     micron_8_ecc_get_status)),
> > +	/* M78A 1Gb 3.3V */
> > +	SPINAND_INFO("MT29F1G01ABAFD", 0x14,
> > +		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> > +		     NAND_ECCREQ(8, 512),
> > +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > +					      &write_cache_variants,
> > +					      &update_cache_variants),
> > +		     0,
> > +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> > +				     micron_8_ecc_get_status)),
> > +	/* M78A 1Gb 1.8V */
> > +	SPINAND_INFO("MT29F1G01ABAFD", 0x15,
> > +		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> > +		     NAND_ECCREQ(8, 512),
> > +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > +					      &write_cache_variants,
> > +					      &update_cache_variants),
> > +		     0,
> > +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> > +				     micron_8_ecc_get_status)),
> >  };
> >
> >  static int micron_spinand_detect(struct spinand_device *spinand)


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/