On Thu, 27 Feb 2020 14:27:08 +0800 "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote: > From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> > > Add support for the Cadence QSPI controller. This controller is > present in the Intel Lightning Mountain(LGM) SoCs, Altera and TI SoCs. > This driver has been tested on the Intel LGM SoCs. > > This driver does not support generic SPI and also the implementation > only supports spi-mem interface to replace the existing driver in > mtd/spi-nor/cadence-quadspi.c, the existing driver only support SPI-NOR > flash memory. Is it really supporting SPI NORs only, or is it just that you only tested it with a spi-nor? > > Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> > Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> > Reported-by: kbuild test robot <lkp@xxxxxxxxx> > Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> Reported-by? What has been reported? > --- > drivers/mtd/spi-nor/Kconfig | 11 - > drivers/mtd/spi-nor/Makefile | 1 - > drivers/spi/Kconfig | 10 + > drivers/spi/Makefile | 1 + > .../spi-cadence-quadspi.c} | 641 ++++++++++----------- Looks like this could be split in several patches to ease the review: 1/ convert to spi-mem 2/ move the driver to drivers/spi 3/ add support for intel,lgm-qspi other than that, that's good to see one more spi-nor controller driver converted to spi-mem. ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/