Re: [PATCH v2 01/11] dt-bindings: spi: allow expressing DTR capability

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

On Wed, 26 Feb 2020 15:06:53 +0530
Pratyush Yadav <p.yadav@xxxxxx> wrote:

> Allow spi devices to express DTR receive and transmit capabilities via
> the properties "spi-rx-dtr" and "spi-tx-dtr".

Is the RX/TX granularity really useful?

> 
> Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-controller.yaml        | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> index 1e0ca6ccf64b..7a84debed213 100644
> --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> @@ -120,6 +120,11 @@ patternProperties:
>          description:
>            Delay, in microseconds, after a read transfer.
>  
> +      spi-rx-dtr:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          Device supports receiving in DTR mode.
> +
>        spi-tx-bus-width:
>          allOf:
>            - $ref: /schemas/types.yaml#/definitions/uint32
> @@ -132,6 +137,11 @@ patternProperties:
>          description:
>            Delay, in microseconds, after a write transfer.
>  
> +      spi-tx-dtr:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          Device supports transmitting in DTR mode.
> +
>      required:
>        - compatible
>        - reg


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/