[PATCH v2 0/3] mtd: spinand: Fix reading and writing of bad block markers

[Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

We were pointed to the issue of bad block markers not being saved to flash on
one of our boards with SPI NAND flash. After a bit of investigation it seems
like there are two overlapping bugs in the original framework that cause silent
failure when writing a bad block marker.

This set contains fixes for both of these issues and one more fix (patch 2) that
should not affect the actual behavior of the driver.

Changes in v2:
 * Patch 1: Incorporate small improvements proposed by Boris
 * Patch 1: Add Boris' R-b tag
 * Patch 2: Add Boris' R-b tag
 * Patch 3: Instead of waiting for the erase operation to finish,
            just don't do an erase at all, as it is not needed.

Frieder Schrempf (3):
  mtd: spinand: Stop using spinand->oobbuf for buffering bad block
    markers
  mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker
    to OOB
  mtd: spinand: Don not erase the block before writing a bad block
    marker

 drivers/mtd/nand/spi/core.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

-- 
2.17.1

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/