In preparation for extending the driver with custom I/O support, try to obtain device specific initialisation routine from a matching device table entry and run it as an additional step of device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx> --- drivers/mtd/nand/raw/ams-delta.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c index 9857ce25debf..97e3b6629c72 100644 --- a/drivers/mtd/nand/raw/ams-delta.c +++ b/drivers/mtd/nand/raw/ams-delta.c @@ -22,6 +22,7 @@ #include <linux/mtd/nand-gpio.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/sizes.h> @@ -230,6 +231,7 @@ static int ams_delta_init(struct platform_device *pdev) struct nand_chip *this; struct mtd_info *mtd; struct gpio_descs *data_gpiods; + int (*probe)(struct platform_device *pdev, struct ams_delta_nand *priv); int err = 0; if (pdata) { @@ -319,6 +321,15 @@ static int ams_delta_init(struct platform_device *pdev) priv->data_gpiods = data_gpiods; priv->data_in = true; + if (pdev->id_entry) + probe = (void *) pdev->id_entry->driver_data; + else + probe = of_device_get_match_data(&pdev->dev); + if (probe) + err = probe(pdev, priv); + if (err) + return err; + /* Initialize the NAND controller object embedded in ams_delta_nand. */ priv->base.ops = &ams_delta_ops; nand_controller_init(&priv->base); -- 2.24.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/