Re: [PATCH v2] mtd: spi-nor: Fixup page size for S25FS-S

[Vignesh Raghavendra <vigneshr@xxxxxx>]

Hi Alexander,

On 06/02/20 5:08 pm, John Garry wrote:
> On 05/02/2020 16:57, Alexander A Sverdlin wrote:
>> From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
>>
[...]
>> +static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
>> +    const struct sfdp_parameter_header *bfpt_header,
>> +    const struct sfdp_bfpt *bfpt,
>> +    struct spi_nor_flash_parameter *params)
>> +{
>> +    const struct flash_info *info = nor->info;
>> +    u8 read_opcode, buf;
>> +    int ret;
>> +
>> +    /* Default is safe */
>> +    params->page_size = info->page_size;
>> +
>> +    /*
>> +     * But is the chip configured for more performant 512 bytes write
>> page
>> +     * size?
>> +     */
>> +    read_opcode = nor->read_opcode;
>> +
>> +    nor->read_opcode = SPINOR_OP_RDAR;
>> +    ret = nor->read(nor, SPINOR_REG_CR3V, 1, &buf);
> 
> The read method is now gone from struct spi_nor, moved into
> spi_nor.controller_ops. And we also support spi_mem ops now.
> 

Yes, please rebase patch on top of latest spi-nor/next or linux-next tree at:

git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git spi-nor/next

Regards
Vignesh


> 
>> +    if (!ret && (buf & CR3V_02H_V))
>> +        params->page_size = 512;
>> +
>> +    nor->read_opcode = read_opcode;
>> +
>> +    return ret;
>> +}
>> +
>> +static const struct spi_nor_fixups s25fs_s_fixups = {
>> +    .post_bfpt = s25fs_s_post_bfpt_fixups,
>> +};
>> +
>>   /* NOTE: double check command sets and memory organization when you add
>>    * more nor chips.  This current list focusses on newer chips, which
>>    * have been converging on command sets which including JEDEC ID.
>> @@ -2536,7 +2569,8 @@ static const struct flash_info spi_nor_ids[] = {
>>               SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>>       { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
>>               SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>> -    { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
>> +    { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR)
>> +            .fixups = &s25fs_s_fixups, },
>>       { "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512,
>> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>>       { "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
>>               SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
>> @@ -2546,7 +2580,8 @@ static const struct flash_info spi_nor_ids[] = {
>>       { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
>>       { "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
>>       { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64,
>> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>> -    { "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256,
>> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>> +    { "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256,
>> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
>> +            .fixups = &s25fs_s_fixups, },
>>       { "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
>>       { "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
>>       { "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index 5abd91c..7ce3e79 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -116,6 +116,7 @@
>>   /* Used for Spansion flashes only. */
>>   #define SPINOR_OP_BRWR        0x17    /* Bank register write */
>>   #define SPINOR_OP_CLSR        0x30    /* Clear status register 1 */
>> +#define SPINOR_OP_RDAR        0x65    /* Read Any Register */
>>     /* Used for Micron flashes only. */
>>   #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
>> @@ -150,6 +151,10 @@
>>   #define SR2_QUAD_EN_BIT1    BIT(1)
>>   #define SR2_QUAD_EN_BIT7    BIT(7)
>>   +/* Used for Spansion flashes RDAR command only. */
>> +#define SPINOR_REG_CR3V        0x800004
>> +#define CR3V_02H_V        BIT(4)    /* Page Buffer Wrap */
>> +
>>   /* Supported SPI protocols */
>>   #define SNOR_PROTO_INST_MASK    GENMASK(23, 16)
>>   #define SNOR_PROTO_INST_SHIFT    16
>>
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

-- 
Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/