[PATCH V4 1/3] dt: bindings: brcmnand: Add support for flash-edu

[Kamal Dasu <kdasu.kdev@xxxxxxxxx>]

Adding support for EBI DMA unit (EDU).

Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/mtd/brcm,brcmnand.txt          | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index 82156dc8f304..05651a654c66 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -35,11 +35,11 @@ Required properties:
                      (optional) NAND flash cache range (if at non-standard offset)
 - reg-names        : a list of the names corresponding to the previous register
                      ranges. Should contain "nand" and (optionally)
-                     "flash-dma" and/or "nand-cache".
-- interrupts       : The NAND CTLRDY interrupt and (if Flash DMA is available)
-                     FLASH_DMA_DONE
-- interrupt-names  : May be "nand_ctlrdy" or "flash_dma_done", if broken out as
-                     individual interrupts.
+                     "flash-dma" or "flash-edu" and/or "nand-cache".
+- interrupts       : The NAND CTLRDY interrupt, (if Flash DMA is available)
+                     FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE
+- interrupt-names  : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done",
+                     if broken out as individual interrupts.
                      May be "nand", if the SoC has the individual NAND
                      interrupts multiplexed behind another custom piece of
                      hardware
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/