From: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx> Add device table for M79A and M78A series Micron SPI NAND devices. Signed-off-by: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx> --- drivers/mtd/nand/spi/micron.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c index c028d0d7e236..5fd1f921ef12 100644 --- a/drivers/mtd/nand/spi/micron.c +++ b/drivers/mtd/nand/spi/micron.c @@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand, } static const struct spinand_info micron_spinand_table[] = { + /* M79A 2Gb 3.3V */ SPINAND_INFO("MT29F2G01ABAGD", 0x24, NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1), NAND_ECCREQ(8, 512), @@ -100,6 +101,36 @@ static const struct spinand_info micron_spinand_table[] = { 0, SPINAND_ECCINFO(µn_8_ooblayout, micron_8_ecc_get_status)), + /* M79A 2Gb 1.8V */ + SPINAND_INFO("MT29F2G01ABBGD", 0x25, + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status)), + /* M78A 1Gb 3.3V */ + SPINAND_INFO("MT29F1G01ABAFD", 0x14, + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status)), + /* M78A 1Gb 1.8V */ + SPINAND_INFO("MT29F1G01ABAFD", 0x15, + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(µn_8_ooblayout, + micron_8_ecc_get_status)), }; static int micron_spinand_detect(struct spinand_device *spinand) -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/