Re: [PATCH 1/2] mtd: rawnand: gpmi: Fix suspend/resume problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2020-01-02 at 13:08:25 UTC, Esben Haabendal wrote:
> On system resume, the gpmi clock must be enabled before accessing gpmi
> block.  Without this, resume causes something like
> 
> [  661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
> [  661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
> [  661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
> [  661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
> 
> Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx>
> Acked-by: Han Xu <han.xu@xxxxxxx>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux