On Fri, 10 Jan 2020 18:17:58 +0200 Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> wrote: > Add microchip,sam9x60-adc to DT bindings documentation. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> I'm assuming this lot of binding changes will all go via Rob. Let me know if you are expecting it to go via the various individual trees. Thanks, Jonathan > --- > Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > index 4a3c1d496e1a..07c59f301b31 100644 > --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > @@ -1,7 +1,7 @@ > * AT91 SAMA5D2 Analog to Digital Converter (ADC) > > Required properties: > - - compatible: Should be "atmel,sama5d2-adc". > + - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc". > - reg: Should contain ADC registers location and length. > - interrupts: Should contain the IRQ line for the ADC. > - clocks: phandle to device clock. ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/