On Mon, 2019-12-16 at 09:01:55 UTC, Christophe Kerello wrote: > We are currently using nand_soft_waitrdy to poll the status of the NAND > flash. FMC2 enables the wait feature bit (this feature is mandatory for > the sequencer mode). By enabling this feature, we can't poll the status > of the NAND flash, the read status command is stucked in FMC2 pipeline > until R/B# signal is high, and locks the CPU bus. > To avoid to lock the CPU bus, we poll FMC2 ISR register. This register > reports the status of the R/B# signal. > > Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") > Signed-off-by: Christophe Kerello <christophe.kerello@xxxxxx> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes, thanks. Miquel ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/