Currently there are 3 different variants of read_id implementation:
1. opcode only. Found in GD5FxGQ4xF.
2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E
3. opcode + 1 dummy byte. Found in other currently supported chips.
Original implementation was for variant 1 and let detect function
of chips with variant 2 and 3 to ignore the first byte. This isn't
robust:
1. For chips of variant 2, if SPI master doesn't keep MOSI low
during read, chip will get a random id offset, and the entire id
buffer will shift by that offset, causing detect failure.
2. For chips of variant 1, if it happens to get a devid that equals
to manufacture id of variant 2 or 3 chips, it'll get incorrectly
detected.
This patch reworks detect procedure to address problems above. New
logic do detection for all variants separatedly, in 1-2-3 order.
Since all current detect methods do exactly the same id matching
procedure, unify them into core.c and remove detect method from
manufacture_ops.
Tested on GD5F1GQ4UAYIG and W25N01GVZEIG.
Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx>
---
drivers/mtd/nand/spi/core.c | 89 +++++++++++++++++++++++--------
drivers/mtd/nand/spi/gigadevice.c | 46 ++++++----------
drivers/mtd/nand/spi/macronix.c | 25 ++-------
drivers/mtd/nand/spi/micron.c | 24 ++-------
drivers/mtd/nand/spi/paragon.c | 23 ++------
drivers/mtd/nand/spi/toshiba.c | 25 ++-------
drivers/mtd/nand/spi/winbond.c | 29 ++--------
include/linux/mtd/spinand.h | 24 ++++-----
8 files changed, 110 insertions(+), 175 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 89f6beefb01c..91293cb10b18 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -370,10 +370,11 @@ static int spinand_wait(struct spinand_device *spinand, u8 *s)
return status & STATUS_BUSY ? -ETIMEDOUT : 0;
}
-static int spinand_read_id_op(struct spinand_device *spinand, u8 *buf)
+static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr,
+ u8 ndummy, u8 *buf)
{
- struct spi_mem_op op = SPINAND_READID_OP(0, spinand->scratchbuf,
- SPINAND_MAX_ID_LEN);
+ struct spi_mem_op op = SPINAND_READID_OP(
+ naddr, ndummy, spinand->scratchbuf, SPINAND_MAX_ID_LEN);
int ret;
ret = spi_mem_exec_op(spinand->spimem, &op);
@@ -753,33 +754,85 @@ static const struct nand_ops spinand_ops = {
.isbad = spinand_isbad,
};
-static const struct spinand_manufacturer *spinand_manufacturers[] = {
+static const struct spinand_manufacturer *spinand_manufacturers_op_id[] = {
&gigadevice_spinand_manufacturer,
+ NULL
+};
+
+static const struct spinand_manufacturer *spinand_manufacturers_op_1a_id[] = {
+ &gigadevice_spinand_manufacturer_1a_id,
+ NULL
+};
+
+static const struct spinand_manufacturer *spinand_manufacturers_op_1d_id[] = {
¯onix_spinand_manufacturer,
µn_spinand_manufacturer,
¶gon_spinand_manufacturer,
&toshiba_spinand_manufacturer,
&winbond_spinand_manufacturer,
+ NULL
};
-static int spinand_manufacturer_detect(struct spinand_device *spinand)
+static int
+spinand_manufacturer_match_id(struct spinand_device *spinand,
+ const struct spinand_manufacturer **manufacturers)
{
- unsigned int i;
+ u8 *id = spinand->id.data;
+ unsigned int i, j;
+ u16 devid;
int ret;
- for (i = 0; i < ARRAY_SIZE(spinand_manufacturers); i++) {
- ret = spinand_manufacturers[i]->ops->detect(spinand);
- if (ret > 0) {
- spinand->manufacturer = spinand_manufacturers[i];
- return 0;
- } else if (ret < 0) {
- return ret;
- }
- }
+ for (i = 0; manufacturers[i]; i++) {
+ if (id[0] != manufacturers[i]->id)
+ continue;
+ devid = 0;
+ for (j = 0; j < manufacturers[i]->devid_len; j++)
+ devid = devid << 8 | id[j + 1];
+
+ ret = spinand_match_and_init(spinand,
+ manufacturers[i]->spinand_table,
+ manufacturers[i]->nchips, devid);
+ if (ret < 0)
+ continue;
+
+ spinand->manufacturer = manufacturers[i];
+ spinand->id.len = 1 + manufacturers[i]->devid_len;
+ return 0;
+ }
return -ENOTSUPP;
}
+static int spinand_manufacturer_detect(struct spinand_device *spinand)
+{
+ u8 *id = spinand->id.data;
+ int ret;
+
+ ret = spinand_read_id_op(spinand, 0, 0, id);
+ if (ret)
+ return ret;
+ ret = spinand_manufacturer_match_id(spinand,
+ spinand_manufacturers_op_id);
+ if (!ret)
+ return 0;
+
+ ret = spinand_read_id_op(spinand, 1, 0, id);
+ if (ret)
+ return ret;
+ ret = spinand_manufacturer_match_id(spinand,
+ spinand_manufacturers_op_1a_id);
+ if (!ret)
+ return 0;
+
+ ret = spinand_read_id_op(spinand, 0, 1, id);
+ if (ret)
+ return ret;
+ ret = spinand_manufacturer_match_id(spinand,
+ spinand_manufacturers_op_1d_id);
+
+ return ret;
+}
+
static int spinand_manufacturer_init(struct spinand_device *spinand)
{
if (spinand->manufacturer->ops->init)
@@ -898,12 +951,6 @@ static int spinand_detect(struct spinand_device *spinand)
if (ret)
return ret;
- ret = spinand_read_id_op(spinand, spinand->id.data);
- if (ret)
- return ret;
-
- spinand->id.len = SPINAND_MAX_ID_LEN;
-
ret = spinand_manufacturer_detect(spinand);
if (ret) {
dev_err(dev, "unknown raw ID %*phN\n", SPINAND_MAX_ID_LEN,
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index e99d425aa93f..363a1ad41dfa 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -194,7 +194,7 @@ static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static const struct spinand_info gigadevice_spinand_table[] = {
+static const struct spinand_info gigadevice_spinand_table_id1[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -231,6 +231,9 @@ static const struct spinand_info gigadevice_spinand_table[] = {
0,
SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+};
+
+static const struct spinand_info gigadevice_spinand_table_id2[] = {
SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -242,39 +245,24 @@ static const struct spinand_info gigadevice_spinand_table[] = {
gd5fxgq4ufxxg_ecc_get_status)),
};
-static int gigadevice_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- u16 did;
- int ret;
-
- /*
- * Earlier GDF5-series devices (A,E) return [0][MID][DID]
- * Later (F) devices return [MID][DID1][DID2]
- */
-
- if (id[0] == SPINAND_MFR_GIGADEVICE)
- did = (id[1] << 8) + id[2];
- else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
- did = id[2];
- else
- return 0;
-
- ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
- ARRAY_SIZE(gigadevice_spinand_table),
- did);
- if (ret)
- return ret;
-
- return 1;
-}
-
static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
- .detect = gigadevice_spinand_detect,
+};
+
+/* These chips need 1 addr byte in read_id op */
+const struct spinand_manufacturer gigadevice_spinand_manufacturer_1a_id = {
+ .id = SPINAND_MFR_GIGADEVICE,
+ .name = "GigaDevice",
+ .devid_len = 1,
+ .spinand_table = gigadevice_spinand_table_id1,
+ .nchips = ARRAY_SIZE(gigadevice_spinand_table_id1),
+ .ops = &gigadevice_spinand_manuf_ops,
};
const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
.id = SPINAND_MFR_GIGADEVICE,
.name = "GigaDevice",
+ .devid_len = 2,
+ .spinand_table = gigadevice_spinand_table_id2,
+ .nchips = ARRAY_SIZE(gigadevice_spinand_table_id2),
.ops = &gigadevice_spinand_manuf_ops,
};
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 21def3f8fb36..7b384ce86d80 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -118,33 +118,14 @@ static const struct spinand_info macronix_spinand_table[] = {
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
};
-static int macronix_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- int ret;
-
- /*
- * Macronix SPI NAND read ID needs a dummy byte, so the first byte in
- * raw_id is garbage.
- */
- if (id[1] != SPINAND_MFR_MACRONIX)
- return 0;
-
- ret = spinand_match_and_init(spinand, macronix_spinand_table,
- ARRAY_SIZE(macronix_spinand_table),
- id[2]);
- if (ret)
- return ret;
-
- return 1;
-}
-
static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
- .detect = macronix_spinand_detect,
};
const struct spinand_manufacturer macronix_spinand_manufacturer = {
.id = SPINAND_MFR_MACRONIX,
.name = "Macronix",
+ .devid_len = 1,
+ .spinand_table = macronix_spinand_table,
+ .nchips = ARRAY_SIZE(macronix_spinand_table),
.ops = ¯onix_spinand_manuf_ops,
};
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..0ad7d2eb1920 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -102,32 +102,14 @@ static const struct spinand_info micron_spinand_table[] = {
mt29f2g01abagd_ecc_get_status)),
};
-static int micron_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- int ret;
-
- /*
- * Micron SPI NAND read ID need a dummy byte,
- * so the first byte in raw_id is dummy.
- */
- if (id[1] != SPINAND_MFR_MICRON)
- return 0;
-
- ret = spinand_match_and_init(spinand, micron_spinand_table,
- ARRAY_SIZE(micron_spinand_table), id[2]);
- if (ret)
- return ret;
-
- return 1;
-}
-
static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
- .detect = micron_spinand_detect,
};
const struct spinand_manufacturer micron_spinand_manufacturer = {
.id = SPINAND_MFR_MICRON,
.name = "Micron",
+ .devid_len = 1,
+ .spinand_table = micron_spinand_table,
+ .nchips = ARRAY_SIZE(micron_spinand_table),
.ops = µn_spinand_manuf_ops,
};
diff --git a/drivers/mtd/nand/spi/paragon.c b/drivers/mtd/nand/spi/paragon.c
index 52307681cbd0..19f6f4269d47 100644
--- a/drivers/mtd/nand/spi/paragon.c
+++ b/drivers/mtd/nand/spi/paragon.c
@@ -117,31 +117,14 @@ static const struct spinand_info paragon_spinand_table[] = {
pn26g0xa_ecc_get_status)),
};
-static int paragon_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- int ret;
-
- /* Read ID returns [0][MID][DID] */
-
- if (id[1] != SPINAND_MFR_PARAGON)
- return 0;
-
- ret = spinand_match_and_init(spinand, paragon_spinand_table,
- ARRAY_SIZE(paragon_spinand_table),
- id[2]);
- if (ret)
- return ret;
-
- return 1;
-}
-
static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
- .detect = paragon_spinand_detect,
};
const struct spinand_manufacturer paragon_spinand_manufacturer = {
.id = SPINAND_MFR_PARAGON,
.name = "Paragon",
+ .devid_len = 1,
+ .spinand_table = paragon_spinand_table,
+ .nchips = ARRAY_SIZE(paragon_spinand_table),
.ops = ¶gon_spinand_manuf_ops,
};
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index 1cb3760ff779..5724f6ca70c0 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -156,33 +156,14 @@ static const struct spinand_info toshiba_spinand_table[] = {
tc58cxgxsx_ecc_get_status)),
};
-static int toshiba_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- int ret;
-
- /*
- * Toshiba SPI NAND read ID needs a dummy byte,
- * so the first byte in id is garbage.
- */
- if (id[1] != SPINAND_MFR_TOSHIBA)
- return 0;
-
- ret = spinand_match_and_init(spinand, toshiba_spinand_table,
- ARRAY_SIZE(toshiba_spinand_table),
- id[2]);
- if (ret)
- return ret;
-
- return 1;
-}
-
static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = {
- .detect = toshiba_spinand_detect,
};
const struct spinand_manufacturer toshiba_spinand_manufacturer = {
.id = SPINAND_MFR_TOSHIBA,
.name = "Toshiba",
+ .devid_len = 1,
+ .spinand_table = toshiba_spinand_table,
+ .nchips = ARRAY_SIZE(toshiba_spinand_table),
.ops = &toshiba_spinand_manuf_ops,
};
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index a6c17e0cace8..489bfe6be2f1 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -94,31 +94,6 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
};
-/**
- * winbond_spinand_detect - initialize device related part in spinand_device
- * struct if it is a Winbond device.
- * @spinand: SPI NAND device structure
- */
-static int winbond_spinand_detect(struct spinand_device *spinand)
-{
- u8 *id = spinand->id.data;
- int ret;
-
- /*
- * Winbond SPI NAND read ID need a dummy byte,
- * so the first byte in raw_id is dummy.
- */
- if (id[1] != SPINAND_MFR_WINBOND)
- return 0;
-
- ret = spinand_match_and_init(spinand, winbond_spinand_table,
- ARRAY_SIZE(winbond_spinand_table), id[2]);
- if (ret)
- return ret;
-
- return 1;
-}
-
static int winbond_spinand_init(struct spinand_device *spinand)
{
struct nand_device *nand = spinand_to_nand(spinand);
@@ -138,12 +113,14 @@ static int winbond_spinand_init(struct spinand_device *spinand)
}
static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
- .detect = winbond_spinand_detect,
.init = winbond_spinand_init,
};
const struct spinand_manufacturer winbond_spinand_manufacturer = {
.id = SPINAND_MFR_WINBOND,
.name = "Winbond",
+ .devid_len = 1,
+ .spinand_table = winbond_spinand_table,
+ .nchips = ARRAY_SIZE(winbond_spinand_table),
.ops = &winbond_spinand_manuf_ops,
};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 4ea558bd3c46..9e7968c6fdbf 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -32,9 +32,9 @@
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
-#define SPINAND_READID_OP(ndummy, buf, len) \
+#define SPINAND_READID_OP(naddr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \
- SPI_MEM_OP_NO_ADDR, \
+ SPI_MEM_OP_ADDR(naddr, 0, 1), \
SPI_MEM_OP_DUMMY(ndummy, 1), \
SPI_MEM_OP_DATA_IN(len, buf, 1))
@@ -189,24 +189,13 @@ struct spinand_id {
/**
* struct manufacurer_ops - SPI NAND manufacturer specific operations
- * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed
- * the core calls the struct_manufacurer_ops->detect() hook of each
- * registered manufacturer until one of them return 1. Note that
- * the first thing to check in this hook is that the manufacturer ID
- * in struct_spinand_device->id matches the manufacturer whose
- * ->detect() hook has been called. Should return 1 if there's a
- * match, 0 if the manufacturer ID does not match and a negative
- * error code otherwise. When true is returned, the core assumes
- * that properties of the NAND chip (spinand->base.memorg and
- * spinand->base.eccreq) have been filled
* @init: initialize a SPI NAND device
* @cleanup: cleanup a SPI NAND device
*
* Each SPI NAND manufacturer driver should implement this interface so that
- * NAND chips coming from this vendor can be detected and initialized properly.
+ * NAND chips coming from this vendor can be initialized properly.
*/
struct spinand_manufacturer_ops {
- int (*detect)(struct spinand_device *spinand);
int (*init)(struct spinand_device *spinand);
void (*cleanup)(struct spinand_device *spinand);
};
@@ -215,15 +204,22 @@ struct spinand_manufacturer_ops {
* struct spinand_manufacturer - SPI NAND manufacturer instance
* @id: manufacturer ID
* @name: manufacturer name
+ * @devid_len: number of bytes in device ID
+ * @spinand_table: array with info for spi nands under current manufacturer
+ * @nchips: number of chips available in spinand_table
* @ops: manufacturer operations
*/
struct spinand_manufacturer {
u8 id;
char *name;
+ u8 devid_len;
+ const struct spinand_info *spinand_table;
+ size_t nchips;
const struct spinand_manufacturer_ops *ops;
};
/* SPI NAND manufacturers */
+extern const struct spinand_manufacturer gigadevice_spinand_manufacturer_1a_id;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
extern const struct spinand_manufacturer micron_spinand_manufacturer;
--
2.24.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
[PATCH] mtd: nand: spi: rework detect procedure for different read id op
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH] mtd: nand: spi: rework detect procedure for different read id op
- From: Chuanhong Guo <gch981213@xxxxxxxxx>
- Date: Thu, 9 Jan 2020 15:54:00 +0800
- Cc: Richard Weinberger <richard@xxxxxx>, Chuanhong Guo <gch981213@xxxxxxxxx>, Vignesh Raghavendra <vigneshr@xxxxxx>, linux-kernel@xxxxxxxxxxxxxxx
- Follow-Ups:
- Re: [PATCH] mtd: nand: spi: rework detect procedure for different read id op
- From: Boris Brezillon
- Re: [PATCH] mtd: nand: spi: rework detect procedure for different read id op
- From: Miquel Raynal
- Re: [PATCH] mtd: nand: spi: rework detect procedure for different read id op
- Prev by Date: Re: [PATCH 8/8] ubi: Relax the 'no MLC' rule and allow MLCs operating in SLC mode
- Next by Date: Re: [PATCH] ubifs: use IS_ENCRYPTED() instead of ubifs_crypt_is_encrypted()
- Previous by thread: [PATCH 0/2] mtd: spi-nor: OTP support
- Next by thread: Re: [PATCH] mtd: nand: spi: rework detect procedure for different read id op
- Index(es):
 |