Re: [PATCH] mtd: spi-nor: Add support for sst26vf016b

[Joseph Kust <joseph.kust@xxxxxxxxxxxxxxxxxxx>]

Hi Tudor,

On Tue, Dec 10, 2019 at 11:10 AM <Tudor.Ambarus@xxxxxxxxxxxxx> wrote:
>
> Hi, Brandon,
>
> On 11/17/19 11:55 PM, Brandon Maier wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > From: Joseph Kust <joseph.kust@xxxxxxxxxxxxxxxxxxx>
> >
> > Adds support for sst26vf016b, a smaller variant of the sst26vf064b.
>
> How was this tested, what controller did you use? Did you test the quad read?

This was tested on a sama5d3 SOC using the atmel,at91rm9200-spi
controller.  The quad read was not tested.
Kernel versions tested were branched from mainline 4.14.115 and 3.14.79

>
> Thanks,
> ta
>
> >
> > Signed-off-by: Joseph Kust <joseph.kust@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Brandon Maier <brandon.maier@xxxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/mtd/spi-nor/spi-nor.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index f4afe123e9dc..500929903f61 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -2538,6 +2538,7 @@ static const struct flash_info spi_nor_ids[] = {
> >         { "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
> >         { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
> >                               SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > +       { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >         { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >
> >         /* ST Microelectronics -- newer production may have feature updates */
> > --
> > 2.23.0
> >
> >

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/