[PATCH AUTOSEL 4.19 069/219] mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET

[Sasha Levin <sashal@xxxxxxxxxx>]

From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>

[ Upstream commit 732774437ae01d9882e60314e303898e63c7f038 ]

The opcodes used by the controller when doing batched page prog should
be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the
default NFC_REG_WCMD_SET value matches the one we set in the driver
which explains why we didn't notice the problem.

Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations")
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/mtd/nand/raw/sunxi_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 1f0b7ee38df56..5b5f4d25a3e12 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1397,7 +1397,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
 	sunxi_nfc_randomizer_enable(mtd);
 
 	writel((NAND_CMD_RNDIN << 8) | NAND_CMD_PAGEPROG,
-	       nfc->regs + NFC_REG_RCMD_SET);
+	       nfc->regs + NFC_REG_WCMD_SET);
 
 	dma_async_issue_pending(nfc->dmac);
 
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/