Re: [PATCH 2/2] dt-bindings: mtd: mtk-quadspi: update bindings for mmap flash read

[Chuanhong Guo <gch981213@xxxxxxxxx>]

Hi!

On Thu, Nov 7, 2019 at 9:09 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Wed, Nov 06, 2019 at 10:07:48PM +0800, Chuanhong Guo wrote:
> > update register descriptions and add an example binding using it.
> >
> > Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/mtd/mtk-quadspi.txt   | 21 ++++++++++++++++++-
> >  1 file changed, 20 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > index a12e3b5c495d..4860f6e96f5a 100644
> > --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > @@ -12,7 +12,10 @@ Required properties:
> >                 "mediatek,mt7623-nor", "mediatek,mt8173-nor"
> >                 "mediatek,mt7629-nor", "mediatek,mt8173-nor"
> >                 "mediatek,mt8173-nor"
> > -- reg:                 physical base address and length of the controller's register
> > +- reg:                 Contains one or two entries, each of which is a tuple consisting of a
> > +               physical address and length. The first entry is the address and length
> > +               of the controller register set. The optional second entry is the address
> > +               and length of the area where the nor flash is mapped to.
>
> All the compatibles support 2 entries? If not, which ones?

It should be. I implemented it as an optional feature only because I
don't know the mapped address space for all these chips and can't
update every device trees.

Regards,
Chuanhong Guo

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/