In onenand_scan if scan_bbt fails the allocated buffers for oob_buf, verify_buf, and page_buf should be released. Fixes: 5988af231978 ("mtd: Flex-OneNAND support") Signed-off-by: Navid Emamdoost <navid.emamdoost@xxxxxxxxx> --- Changes in v2: -- added release for this->verify_buf (thanks to Miquel Raynal for the hint). --- drivers/mtd/nand/onenand/onenand_base.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c index 77bd32a683e1..6329ada3f15c 100644 --- a/drivers/mtd/nand/onenand/onenand_base.c +++ b/drivers/mtd/nand/onenand/onenand_base.c @@ -3977,8 +3977,14 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) this->badblockpos = ONENAND_BADBLOCK_POS; ret = this->scan_bbt(mtd); - if ((!FLEXONENAND(this)) || ret) + if ((!FLEXONENAND(this)) || ret) { + kfree(this->oob_buf); +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE + kfree(this->verify_buf); +#endif + kfree(this->page_buf); return ret; + } /* Change Flex-OneNAND boundaries if required */ for (i = 0; i < MAX_DIES; i++) -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/