On Tue, Sep 10, 2019 at 3:11 PM Boris Stein <boris.stein@xxxxxxxxx> wrote: [...] > But then there is a failure when system boots: [...] > [ 5.919637] ubi0: attaching mtd25 > [ 7.038038] ubi0: scanning is finished > [ 7.048738] ubi0: attached mtd25 (name "system", size 319 MiB) > [ 7.048767] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes > [ 7.053530] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 > [ 7.060333] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 > [ 7.067173] ubi0: good PEBs: 1279, bad PEBs: 0, corrupted PEBs: 0 > [ 7.073956] ubi0: user volume: 8, internal volumes: 1, max. volumes > count: 128 > [ 7.080208] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, > image sequence number: 796905358 > [ 7.087316] ubi0: available PEBs: 0, total reserved PEBs: 1279, > PEBs reserved for bad PEB handling: 40 > [ 7.096278] ubi0: background thread "ubi_bgt0d" started, PID 207 > [ 7.105838] cpuidle: enable-method property 'psci' found operations > [ 7.106471] lpm_levels_of: Residency < 0 for LPM > [ 7.106475] lpm_levels_of: idx 1 420 > [ 7.106478] lpm_levels_of: Residency < 0 for LPM > [ 7.106480] lpm_levels_of: idx 2 500 > [ 7.106483] lpm_levels_of: idx 2 3040 > [ 7.106693] lpm_levels: register_cluster_lpm_stats() > [ 7.108873] rmnet_ipa3 started initialization > [ 7.109878] RNDIS_IPA module is loaded. > [ 7.109878] audio_pdr_late_init get_service_location failed ret -19 > [ 7.110531] msm_bus_late_init: Remove handoff bw requests > [ 7.135649] vreg_sd_mmc: disabling > [ 7.135656] emac_phy: disabling > [ 7.135661] rgmii_io_pads: disabling > [ 7.135668] vreg_wlan: disabling > [ 7.135672] ALSA devic[ 7.193476] Freeing unused kernel memory: 1024K > /etc/mdev/iio.sh: .: line 19: can't open > '/sys/bus/i2c/devices/*-006*/iio:device?*/uevent' > [ 7.697004] iio.sh (216) used greatest stack depth: 6288 bytes left > /etc/mdev/iio.sh: .: line 19: can't open > '/sys/bus/i2c/devices/*-006*/iio:device?*/uevent' > [ 7.730144] iio.sh (218) used greatest stack depth: 6256 bytes left > mkdir: can't create directory '/mnt/sdcard/': No such file or directory > mount: mounting /dev/mmcblk0p1 on /mnt/sdcard/ failed: No such file or directory > [ 8.038745] mdev (214) used greatest stack depth: 6000 bytes left > mdm-init : Detected block device : 25 for system > [ 8.051651] ubi: mtd25 is already attached to ubi0ubiattach: > error!: cannot attach mtd25 > error 17 (File exists) > [ 8.107261] Waiting for ubinfo for md-rootfs > [ 8.107431] Done ubinfo for md-rootfs, volume ID: 1 > [ 8.111069] Waiting for /dev/ubi0_1 > [ 8.115328] Done waiting for /dev/ubi0_1 > [ 8.124406] block ubiblock0_1: created from ubi0:1(md-rootfs) > [ 8.125039] Waiting for /dev/ubiblock0_1 > [ 8.186355] Done waiting for /dev/ubiblock0_1 > [ 8.216688] Waiting for ubinfo for rootfs > [ 8.216872] Done ubinfo for rootfs, volume ID: 0 > [ 8.219764] Waiting for /dev/ubi0_0 > [ 8.224833] Done waiting for /dev/ubi0_0 > [ 8.233326] block ubiblock0_0: created from ubi0:0(rootfs) > [ 8.233943] Waiting for /dev/ubiblock0_0 > [ 8.301729] Done waiting for /dev/ubiblock0_0 > [ 8.614592] 1911 device_is_secure: ######################### > device_is_secure=0 ??? > [ 8.651724] Waiting for ubinfo for md-sdatafs > [ 8.651900] Done ubinfo for md-sdatafs, volume ID: 3 > [ 8.655158] Waiting for /dev/ubi0_3 > [ 8.660428] Done waiting for /dev/ubi0_3 > [ 8.668817] block ubiblock0_3: created from ubi0:3(md-sdatafs) > [ 8.669459] Waiting for /dev/ubiblock0_3 > [ 8.734968] Done waiting for /dev/ubiblock0_3 > [ 8.766984] Waiting for ubinfo for sdatafs > [ 8.767156] Done ubinfo for sdatafs, volume ID: 2 > [ 8.770369] Waiting for /dev/ubi0_2 > [ 8.774891] Done waiting for /dev/ubi0_2 > [ 8.783874] block ubiblock0_2: created from ubi0:2(sdatafs) > [ 8.784493] Waiting for /dev/ubiblock0_2 > [ 8.851409] Done waiting for /dev/ubiblock0_2 > [ 8.913053] 1911 device_is_secure: ######################### > device_is_secure=0 ??? > mount: mounting /dev on /system/dev failed: Invalid argument > mount: mounting /dev/pts on /system/dev/pts failed: No such file or directory wut? > [ 9.006327] SQUASHFS error: zlib decompression failed, data probably corrupt > [ 9.006359] SQUASHFS error: squashfs_read_data failed to read block 0x785a5a usually squashfs has a blocksize of 1k or 4k. So block 0x785a5a is out of bounds. > [ 9.012677] SQUASHFS error: Unable to read fragment cache entry [785a5a] > [ 9.019470] SQUASHFS error: Unable to read page, block 785a5a, size d6b4 > [ 9.026242] SQUASHFS error: Unable to read fragment cache entry [785a5a] > [ 9.032876] SQUASHFS error: Unable to read page, block 785a5a, size d6b4 > [ 9.039529] SQUASHFS error: Unable to read fragment cache entry [785a5a] > [ 9.046225] SQUASHFS error: Unable to read page, block 785a5a, size d6b4 > [ 9.052910] SQUASHFS error: Unable to read fragment cache entry [785a5a] > [ 9.059573] SQUASHFS error: Unable to read page, block 785a5a, size d6b4 > [ 9.066281] SQUASHFS error: Unable to read fragment cache entry [785a5a] > [ 9.072954] SQUASHFS error: Unable to read page, block 785a5a, size d6b4 > > > Please adivse, There seem to be many other components involved. Is the squashfs image actually correct? -- Thanks, //richard ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/