Hi Miquel, > > Mason Yang <masonccyang@xxxxxxxxxxx> wrote on Tue, 20 Aug 2019 13:53:48 > +0800: > > > Macronix NANDs support randomizer operation for user data scrambled, > > which can be enabled with a SET_FEATURE. > > > > User data written to the NAND device without randomizer is still readable > > after randomizer function enabled. > > The penalty of randomizer are NOP = 1 instead of NOP = 4 and more time period > > please don't use 'NOP' here, use 'subpage accesses' instead, otherwise > people might not understand what it means while it has a real impact. > okay, understood. will fix it by next submitting. > > is needed in program operation and entering deep power-down mode. > > i.e., tPROG 300us to 340us(randomizer enabled) > > > > If subpage write not available with hardware ECC, for example, > > NAND chip options NAND_NO_SUBPAGE_WRITE be set in driver and > > randomizer function is recommended for high-reliability. > > Driver checks byte 167 of Vendor Blocks in ONFI parameter page table > > to see if this high-reliability function is supported. > > > > You did not flagged this patch as a v2 and forgot about the changelog. will fix, thank you. > You did not listen to our comments in the last version neither. I was > open to a solution with a specific DT property for warned users but I > don't see it coming. Sorry I missed the previous version of "read-retry and randomizer support" patch. Specific DT property is a good method to control it. For more high-reliability concern, randomizer is recommended to enable by default, but sub-page write is not allowed when randomizer is enabled. Since most of HW ECC did not support sub-page write and we think driver to check chip options flags is another simple and good way to enable randomizer. > > > Thanks, > Miquèl thanks for your time and comments. best regards, Mason CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/