On Fri, 23 Aug 2019 15:53:39 +0000 <Tudor.Ambarus@xxxxxxxxxxxxx> wrote: > From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> > > All flash parameters and settings should reside inside > 'struct spi_nor_flash_parameter'. Drop the local copy of > quad_enable() and use the one from 'struct spi_nor_flash_parameter'. > > Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> > --- > drivers/mtd/spi-nor/spi-nor.c | 38 ++++++++++++++++++++++---------------- > include/linux/mtd/spi-nor.h | 2 -- > 2 files changed, 22 insertions(+), 18 deletions(-) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index e9b9cd70a999..6bd104c29cd9 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -4403,7 +4403,6 @@ static int spi_nor_setup(struct spi_nor *nor, > { > struct spi_nor_flash_parameter *params = &nor->params; > u32 ignored_mask, shared_mask; > - bool enable_quad_io; > int err; > > /* > @@ -4457,17 +4456,27 @@ static int spi_nor_setup(struct spi_nor *nor, > return err; > } > > - /* Enable Quad I/O if needed. */ > - enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || > - spi_nor_get_protocol_width(nor->write_proto) == 4); > - if (enable_quad_io && params->quad_enable) > - nor->quad_enable = params->quad_enable; > - else > - nor->quad_enable = NULL; > - > return 0; > } > > +/** > + * spi_nor_quad_enable() - enable Quad I/O if needed. > + * @nor: pointer to a 'struct spi_nor' > + * > + * Return: 0 on success, -errno otherwise. > + */ > +static int spi_nor_quad_enable(struct spi_nor *nor) > +{ > + if (!nor->params.quad_enable) > + return 0; > + > + if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 || > + spi_nor_get_protocol_width(nor->write_proto) == 4)) > + return 0; > + > + return nor->params.quad_enable(nor); > +} > + > static int spi_nor_init(struct spi_nor *nor) > { > int err; > @@ -4484,12 +4493,10 @@ static int spi_nor_init(struct spi_nor *nor) > } > } > > - if (nor->quad_enable) { > - err = nor->quad_enable(nor); > - if (err) { > - dev_err(nor->dev, "quad mode not supported\n"); > - return err; > - } > + err = spi_nor_quad_enable(nor); > + if (err) { > + dev_err(nor->dev, "quad mode not supported\n"); > + return err; > } > > if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) { > @@ -4706,7 +4713,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, > * - select op codes for (Fast) Read, Page Program and Sector Erase. > * - set the number of dummy cycles (mode cycles + wait states). > * - set the SPI protocols for register and memory accesses. > - * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). > */ > ret = spi_nor_setup(nor, hwcaps); > if (ret) > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h > index 77ba692d9348..17787238f0e9 100644 > --- a/include/linux/mtd/spi-nor.h > +++ b/include/linux/mtd/spi-nor.h > @@ -535,7 +535,6 @@ struct flash_info; > * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR > * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is > * completely locked > - * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode > * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from > * the SPI NOR Status Register. > * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings. > @@ -579,7 +578,6 @@ struct spi_nor { > int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); > int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); > int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); > - int (*quad_enable)(struct spi_nor *nor); > int (*clear_sr_bp)(struct spi_nor *nor); > struct spi_nor_flash_parameter params; > ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/