Re: [PATCH 6/8] mtd: spinand: micron: Turn driver implementation generic

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Shiva,

shiva.linuxworks@xxxxxxxxx wrote on Mon, 22 Jul 2019 07:56:19 +0200:

> From: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
>

I am not sure the "turn implemenatation generic" title describes what
you do.
 
> Driver is redesigned using parameter page to support Micron SPI NAND
> flashes.

Redesigned is perhaps a bit too much.

"
> The reason why spinand_select_op_variant globalized is that the Micron
> driver no longer calling spinand_match_and_init.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
> ---
>  drivers/mtd/nand/spi/core.c   |  2 +-
>  drivers/mtd/nand/spi/micron.c | 61 +++++++++++++++++++++++++----------
>  include/linux/mtd/spinand.h   |  4 +++
>  3 files changed, 49 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 7ae76dab9141..aae715d388b7 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -920,7 +920,7 @@ static void spinand_manufacturer_cleanup(struct spinand_device *spinand)
>  		return spinand->manufacturer->ops->cleanup(spinand);
>  }
>  
> -static const struct spi_mem_op *
> +const struct spi_mem_op *
>  spinand_select_op_variant(struct spinand_device *spinand,
>  			  const struct spinand_op_variants *variants)
>  {
> diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
> index 95bc5264ebc1..6fde93ec23a1 100644
> --- a/drivers/mtd/nand/spi/micron.c
> +++ b/drivers/mtd/nand/spi/micron.c
> @@ -90,22 +90,10 @@ static int micron_ecc_get_status(struct spinand_device *spinand,
>  	return -EINVAL;
>  }
>  
> -static const struct spinand_info micron_spinand_table[] = {
> -	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
> -		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
> -		     NAND_ECCREQ(8, 512),
> -		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> -					      &write_cache_variants,
> -					      &update_cache_variants),
> -		     0,
> -		     SPINAND_ECCINFO(&micron_ooblayout_ops,
> -				     micron_ecc_get_status)),
> -};
> -

I don't know if it is wise to drop this structure.

>  static int micron_spinand_detect(struct spinand_device *spinand)
>  {
> +	const struct spi_mem_op *op;
>  	u8 *id = spinand->id.data;
> -	int ret;
>  
>  	/*
>  	 * Micron SPI NAND read ID need a dummy byte,
> @@ -114,16 +102,55 @@ static int micron_spinand_detect(struct spinand_device *spinand)
>  	if (id[1] != SPINAND_MFR_MICRON)
>  		return 0;
>  
> -	ret = spinand_match_and_init(spinand, micron_spinand_table,
> -				     ARRAY_SIZE(micron_spinand_table), id[2]);

I am not sure this is the right solution. I would keep this call and
overwrite what you need to overwrite with the fixup hook.

> -	if (ret)
> -		return ret;
> +	spinand->flags = 0;
> +	spinand->eccinfo.get_status = micron_ecc_get_status;
> +	spinand->eccinfo.ooblayout = &micron_ooblayout_ops;
> +
> +	op = spinand_select_op_variant(spinand,
> +				       &read_cache_variants);
> +	if (!op)
> +		return -ENOTSUPP;
> +
> +	spinand->op_templates.read_cache = op;
> +
> +	op = spinand_select_op_variant(spinand,
> +				       &write_cache_variants);
> +	if (!op)
> +		return -ENOTSUPP;
> +
> +	spinand->op_templates.write_cache = op;
> +
> +	op = spinand_select_op_variant(spinand,
> +				       &update_cache_variants);
> +	spinand->op_templates.update_cache = op;
>  
>  	return 1;
>  }
>  
> +static void micron_fixup_param_page(struct spinand_device *spinand,
> +				    struct nand_onfi_params *p)
> +{
> +	/*
> +	 * As per Micron datasheets vendor[83] is defined as
> +	 * die_select_feature
> +	 */
> +	if (p->vendor[83] && !p->interleaved_bits)
> +		spinand->base.memorg.planes_per_lun = 1 << p->vendor[0];
> +
> +	spinand->base.memorg.ntargets = p->lun_count;
> +	spinand->base.memorg.luns_per_target = 1;
> +
> +	/*
> +	 * As per Micron datasheets,
> +	 * vendor[82] is ECC maximum correctability
> +	 */
> +	spinand->base.eccreq.strength = p->vendor[82];
> +	spinand->base.eccreq.step_size = 512;
> +}
> +
>  static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
>  	.detect = micron_spinand_detect,
> +	.fixup_param_page = micron_fixup_param_page,
>  };
>  
>  const struct spinand_manufacturer micron_spinand_manufacturer = {
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index fea820a20bc9..ddb2194273a8 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -461,4 +461,8 @@ int spinand_match_and_init(struct spinand_device *dev,
>  int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
>  int spinand_select_target(struct spinand_device *spinand, unsigned int target);
>  
> +const struct spi_mem_op *
> +spinand_select_op_variant(struct spinand_device *spinand,
> +			  const struct spinand_op_variants *variants);
> +
>  #endif /* __LINUX_MTD_SPINAND_H */




Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/