On 31/07/19 2:42 PM, Tudor.Ambarus@xxxxxxxxxxxxx wrote: > From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> > > S3AN flashes use a specific opcode to read the status register. > We currently use the SPI_S3AN flag to decide whether this specific > SR read opcode should be used, but SPI_S3AN is about to disappear, so > let's add a new flag. > I think you can drop SPI_S3AN right away either as separate patch in this series or as part of this patch itself. Regards Vignesh > Note that we use the same bit as SPI_S3AN implies SPI_NOR_XSR_RDY and > vice versa. > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> > Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> > --- > drivers/mtd/spi-nor/spi-nor.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index 5fea5d7ce2cb..01be6d49ce3b 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -213,6 +213,14 @@ struct flash_info { > * bit. Must be used with > * SPI_NOR_HAS_LOCK. > */ > +#define SPI_NOR_XSR_RDY BIT(10) /* > + * S3AN flashes have specific opcode to > + * read the status register. > + * Flags SPI_NOR_XSR_RDY and SPI_S3AN > + * use the same bit as one implies the > + * other, but we will get rid of > + * SPI_S3AN soon. > + */ > #define SPI_S3AN BIT(10) /* > * Xilinx Spartan 3AN In-System Flash > * (MFR cannot be used for probing > @@ -4818,7 +4826,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, > * spi_nor_wait_till_ready(). Xilinx S3AN share MFR > * with Atmel spi-nor > */ > - if (info->flags & SPI_S3AN) > + if (info->flags & SPI_NOR_XSR_RDY) > nor->flags |= SNOR_F_READY_XSR_RDY; > > /* Kept only for backward compatibility purpose. */ > -- Regards Vignesh ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/