[RFC v1 3/3] mtd: m25p80: add get Flash size callback support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add get Flash size function support for
passing Flash size through callback use
to the spi layer.

Add get Flash size function support

Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
---
 drivers/mtd/devices/m25p80.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c50888670250..fd14c8c6d8d8 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -151,6 +151,15 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 	return len;
 }
 
+/* Sending Flash size thourgh callback function to spi layer */
+size_t	m25p80_get_flash_size(void *param)
+{
+	struct spi_mem *spimem = param;
+	struct m25p *flash = spi_mem_get_drvdata(spimem);
+
+	return (u32)(flash->spi_nor.mtd.size >> 10) * 1024;
+}
+
 /*
  * board specific setup should have ensured the SPI clock used here
  * matches what the READ command supports, at least until this driver
@@ -188,6 +197,9 @@ static int m25p_probe(struct spi_mem *spimem)
 	spi_nor_set_flash_node(nor, spi->dev.of_node);
 	nor->priv = flash;
 
+	spimem->callback = m25p80_get_flash_size;
+	spimem->callback_param = spimem;
+
 	spi_mem_set_drvdata(spimem, flash);
 	flash->spimem = spimem;
 
-- 
2.18.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux