[PATCH] dt-bindings: spi: stm32-qspi: add dma properties

[Ludovic Barre <ludovic.Barre@xxxxxx>]

From: Ludovic Barre <ludovic.barre@xxxxxx>

This patch adds description of dma properties (optional).

Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
 Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
index adeeb63..bfc038b 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
@@ -19,8 +19,11 @@ Required properties:
 - reg: chip-Select number (QSPI controller may connect 2 flashes)
 - spi-max-frequency: max frequency of spi bus
 
-Optional property:
+Optional properties:
 - spi-rx-bus-width: see ./spi-bus.txt for the description
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: DMA request names should include "tx" and "rx" if present.
 
 Example:
 
-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/