Re: [PATCH v2 1/3] mtd: spi-nor: add support for is25wp256

[Sagar Kadam <sagar.kadam@xxxxxxxxxx>]

Thank you Paul, for your review comments.

On Tue, Apr 30, 2019 at 10:33 PM Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
>
> On Sun, 28 Apr 2019, Sagar Shrikant Kadam wrote:
>
> > Update spi_nor_id tablet for is25wp256 (32MB)device from ISSI,
> > present on HiFive Unleashed dev board (Rev: A00).
> >
> > Set method to enable quad mode for ISSI device in flash parameters
> > table.
>
> This patch was based on one originally written by Wes and/or Palmer:
> https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b
>
> The right thing to do is to note this in the commit message.
>
Yes true, this is important as well.
I had mentioned this in the covering letter, but I missed to add the
details into the commit message,
I will submit V3 for this.


> > Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
> > ---
> >  drivers/mtd/spi-nor/spi-nor.c | 10 +++++++++-
> >  include/linux/mtd/spi-nor.h   |  1 +
> >  2 files changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index fae1474..c5408ed 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -1834,6 +1834,10 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
> >                       SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >       { "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
> >                       SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > +     { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 1024,
> > +                     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> > +                     SPI_NOR_4B_OPCODES)
> > +     },
> >
> >       /* Macronix */
> >       { "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
> > @@ -3650,6 +3654,10 @@ static int spi_nor_init_params(struct spi_nor *nor,
> >               case SNOR_MFR_MACRONIX:
> >                       params->quad_enable = macronix_quad_enable;
> >                       break;
> > +             case SNOR_MFR_ISSI:
> > +                     params->quad_enable = macronix_quad_enable;
> > +                     break;
> > +
> >
> >               case SNOR_MFR_ST:
> >               case SNOR_MFR_MICRON:
> > @@ -4127,7 +4135,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> >       if (ret)
> >               return ret;
> >
> > -     if (nor->addr_width) {
> > +     if (nor->addr_width && JEDEC_MFR(info) != SNOR_MFR_ISSI) {
> >               /* already configured from SFDP */
> >       } else if (info->addr_width) {
> >               nor->addr_width = info->addr_width;
> > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> > index b3d360b..ff13297 100644
> > --- a/include/linux/mtd/spi-nor.h
> > +++ b/include/linux/mtd/spi-nor.h
> > @@ -19,6 +19,7 @@
> >  #define SNOR_MFR_ATMEL               CFI_MFR_ATMEL
> >  #define SNOR_MFR_GIGADEVICE  0xc8
> >  #define SNOR_MFR_INTEL               CFI_MFR_INTEL
> > +#define SNOR_MFR_ISSI                0x9d            /* ISSI */
> >  #define SNOR_MFR_ST          CFI_MFR_ST      /* ST Micro */
> >  #define SNOR_MFR_MICRON              CFI_MFR_MICRON  /* Micron */
> >  #define SNOR_MFR_MACRONIX    CFI_MFR_MACRONIX
> > --
> > 1.9.1
> >
> >

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/