Re: [PATCH 5/5] mtd: rawnand: mtk: Setup empty page threshold correctly

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Xiaolei,

Xiaolei Li <xiaolei.li@xxxxxxxxxxxx> wrote on Mon, 29 Apr 2019 14:38:34
+0800:

> MTK NAND Controller has the ability to check whether read data are
> mostly 0xff by comparing zero bit conut of read data with empty

                                    count ? 
> threshold automatically.
> 
> But now we never set this threshold and always make it be default value
> which is 10.
> 
> This patch fixes this problem by setting empty threshold as the product
> of read sector count and ecc strength.

Do we use these feature yet?

s/ecc/ECC/

> 
> Fixes: 93db446a424c ("mtd: nand: move raw NAND related code to the raw/ subdir")

Ditto.

> Signed-off-by: Xiaolei Li <xiaolei.li@xxxxxxxxxxxx>
> ---
>  drivers/mtd/nand/raw/mtk_nand.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
> index cf5e50e704ae..675d4faa3480 100644
> --- a/drivers/mtd/nand/raw/mtk_nand.c
> +++ b/drivers/mtd/nand/raw/mtk_nand.c
> @@ -94,6 +94,7 @@
>  #define NFI_MASTER_STA		(0x224)
>  #define		MASTER_STA_MASK		(0x0FFF)
>  #define NFI_EMPTY_THRESH	(0x23C)
> +#define		EMPTY_THRESH_MASK	GENMASK(7, 0)
>  
>  #define MTK_NAME		"mtk-nand"
>  #define KB(x)			((x) * 1024UL)
> @@ -931,6 +932,10 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
>  		return -EINVAL;
>  	}
>  
> +	/* Setup empty threshold */
> +	reg = max(sectors * chip->ecc.strength, EMPTY_THRESH_MASK);
> +	nfi_writel(nfc, reg, NFI_EMPTY_THRESH);
> +
>  	reg = nfi_readw(nfc, NFI_CNFG);
>  	reg |= CNFG_READ_EN | CNFG_DMA_BURST_EN | CNFG_AHB;
>  	if (!raw) {




Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/