[PATCH 01/14] mtd: rawnand: export NAND operation tracer

[Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>]

The NAND core has a NAND operation tracing function, but it can only
be used by drivers using the generic option parser from the NAND core.
Export the tracing function as a static inline function in rawnand.h
so that drivers implementing exec_op directly do not have to write their
own operation tracing.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/mtd/nand/raw/nand_base.c | 30 +-------------------------
 include/linux/mtd/rawnand.h      | 37 ++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index ddd396e93e32..c224b70770c9 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -2090,35 +2090,7 @@ static void nand_op_parser_trace(const struct nand_op_parser_ctx *ctx)
 		if (instr == &ctx->subop.instrs[0])
 			prefix = "    ->";
 
-		switch (instr->type) {
-		case NAND_OP_CMD_INSTR:
-			pr_debug("%sCMD      [0x%02x]\n", prefix,
-				 instr->ctx.cmd.opcode);
-			break;
-		case NAND_OP_ADDR_INSTR:
-			pr_debug("%sADDR     [%d cyc: %*ph]\n", prefix,
-				 instr->ctx.addr.naddrs,
-				 instr->ctx.addr.naddrs < 64 ?
-				 instr->ctx.addr.naddrs : 64,
-				 instr->ctx.addr.addrs);
-			break;
-		case NAND_OP_DATA_IN_INSTR:
-			pr_debug("%sDATA_IN  [%d B%s]\n", prefix,
-				 instr->ctx.data.len,
-				 instr->ctx.data.force_8bit ?
-				 ", force 8-bit" : "");
-			break;
-		case NAND_OP_DATA_OUT_INSTR:
-			pr_debug("%sDATA_OUT [%d B%s]\n", prefix,
-				 instr->ctx.data.len,
-				 instr->ctx.data.force_8bit ?
-				 ", force 8-bit" : "");
-			break;
-		case NAND_OP_WAITRDY_INSTR:
-			pr_debug("%sWAITRDY  [max %d ms]\n", prefix,
-				 instr->ctx.waitrdy.timeout_ms);
-			break;
-		}
+		nand_op_trace(prefix, instr);
 
 		if (instr == &ctx->subop.instrs[ctx->subop.ninstrs - 1])
 			prefix = "      ";
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index b7445a44a814..f1557499b339 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -860,6 +860,43 @@ struct nand_operation {
 int nand_op_parser_exec_op(struct nand_chip *chip,
 			   const struct nand_op_parser *parser,
 			   const struct nand_operation *op, bool check_only);
+
+static inline void nand_op_trace(const char *prefix,
+				 const struct nand_op_instr *instr)
+{
+#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
+	switch (instr->type) {
+	case NAND_OP_CMD_INSTR:
+		pr_debug("%sCMD      [0x%02x]\n", prefix,
+			 instr->ctx.cmd.opcode);
+		break;
+	case NAND_OP_ADDR_INSTR:
+		pr_debug("%sADDR     [%d cyc: %*ph]\n", prefix,
+			 instr->ctx.addr.naddrs,
+			 instr->ctx.addr.naddrs < 64 ?
+			 instr->ctx.addr.naddrs : 64,
+			 instr->ctx.addr.addrs);
+		break;
+	case NAND_OP_DATA_IN_INSTR:
+		pr_debug("%sDATA_IN  [%d B%s]\n", prefix,
+			 instr->ctx.data.len,
+			 instr->ctx.data.force_8bit ?
+			 ", force 8-bit" : "");
+		break;
+	case NAND_OP_DATA_OUT_INSTR:
+		pr_debug("%sDATA_OUT [%d B%s]\n", prefix,
+			 instr->ctx.data.len,
+			 instr->ctx.data.force_8bit ?
+			 ", force 8-bit" : "");
+		break;
+	case NAND_OP_WAITRDY_INSTR:
+		pr_debug("%sWAITRDY  [max %d ms]\n", prefix,
+			 instr->ctx.waitrdy.timeout_ms);
+		break;
+	}
+#endif
+}
+
 /**
  * struct nand_controller_ops - Controller operations
  *
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/