Hi! On Wed, Apr 24, 2019 at 10:48 PM Chuanhong Guo <gch981213@xxxxxxxxx> wrote: > > According to datasheet the free areas are 0-0x7ff and 0x810-0x83f. Sorry. I accidentally throwed the data area here and reserved too much for bad block mark. Your F variant chip has the same OOB layout as currently supported gd5fxgq4uexxg. > 0x840-0x87f is the ECC area. > > > [...] Regards, Chuanhong Guo ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
- From: Chuanhong Guo <gch981213@xxxxxxxxx>
- Date: Wed, 24 Apr 2019 23:01:09 +0800
- Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx
- In-reply-to: <CAJsYDV+Y4-xcuLqv7QTL_BtNcVOZriwnrkyTCTLjxJi2WuHv2w@mail.gmail.com>
- References: <5d6f2392-ac70-3192-bc16-ab3f7a88ca04@allycomm.com> <CAJsYDV+Y4-xcuLqv7QTL_BtNcVOZriwnrkyTCTLjxJi2WuHv2w@mail.gmail.com>
- References:
- spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
- From: Jeff Kletsky
- Re: spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
- From: Chuanhong Guo
- spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
- Prev by Date: [PATCH AUTOSEL 3.18 05/10] jffs2: fix use-after-free on symlink traversal
- Next by Date: Re: [RFC PATCH 1/1] mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
- Previous by thread: Re: spi-nand: GigaDevices Support; qca9560-spi Device-ID Byte-Shift Inconsistency
- Next by thread: [RFC PATCH 0/1] Re-license MTK NAND driver
- Index(es):
 |