Re: [PATCH 4/4] mtd: rawnand: meson: only initialize the RB completion once

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Martin,

On 2019/4/19 3:44, Martin Blumenstingl wrote:
Hi Liang,

On Mon, Apr 15, 2019 at 8:04 AM Liang Yang <liang.yang@xxxxxxxxxxx> wrote:


On 2019/4/12 6:00, Martin Blumenstingl wrote:
Documentation/scheduler/completion.txt states:
    Calling init_completion() on the same completion object twice is
    most likely a bug as it re-initializes the queue to an empty queue and
    enqueued tasks could get "lost" - use reinit_completion() in that case,
    but be aware of other races.

Initialize nfc->completion in meson_nfc_probe using init_completion and
change the call in meson_nfc_queue_rb to reinit_completion so the logic
matches what the documentation suggests.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
   drivers/mtd/nand/raw/meson_nand.c | 3 ++-
   1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 57cc4bd3f665..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
       cfg |= NFC_RB_IRQ_EN;
       writel(cfg, nfc->reg_base + NFC_REG_CFG);

-     init_completion(&nfc->completion);
+     reinit_completion(&nfc->completion);
Tested-by:Liang Yang <liang.yang@xxxxxxxxxxx>
Acked-by: Liang Yang <liang.yang@xxxxxxxxxxx>
thank you for reviewing and testing my patches!

[...]
Tested-by:Liang Yang <liang.yang@xxxxxxxxxxx>
Acked-by: Liang Yang <liang.yang@xxxxxxxxxxx>
please consider the following note for future code-reviews:
most maintainers take the patch from patchwork and apply it to their git tree.
however, patchwork is not smart enough to detect when the same
Tested-by/Acked-by is sent multiple times.
this results in the same Tested-by/Acked-by being listed multiple
times in the final commit: [0]

what I do instead is to reply with one set of Tested-by/Acked-by
(below the author's Signed-off-by) which is then valid for the whole
patch.
There's no problem to have Tested-by and Acked-by at the same time,
the issue only shows up if you send Acked-by (or any other tag) for
the same patch multiple times.

Thanks. Well, I known about it now.


Have a great day!
Regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/commit/?h=nand/next&id=39e01956e2f70ff9f0e97db1a69c9847aa1d5d8b

.


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux