On 04/12/2019 12:29 PM, Vignesh Raghavendra wrote: > Add binding documentation for TI's HyperBus memory controller present on > AM654 SoC. > > Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> > --- > .../devicetree/bindings/mtd/ti,am654-hbmc.txt | 31 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt > > diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt > new file mode 100644 > index 000000000000..00888482df25 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt > @@ -0,0 +1,31 @@ [...] > +Optional properties: > +- mux-controls: phandle to the multiplexer that controls selection of > + HBMC vs OSPI. Mux state of 1 indicates HBMC is selected. I thought this is usually done with the help of drivers/pinctrl/.. > + > +Example: > + hbmc: hbmc@47034000 { > + compatible = "ti,am654-hbmc"; > + reg = <0x0 0x47034000 0x0 0x100>, > + <0x5 0x00000000 0x1 0x0000000>; > + power-domains = <&k3_pds 55>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ > + <0x1 0x5 0x04000000 0x4000000>; /* CS1 - 64MB > + > + /* Slave flash node */ > + flash@0{ Need space before {. > + compatible = "cypress,hyperflash"; > + reg = <0x0 0x4000000>; > + }; > + }; [...] MBR, Sergei ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/