Since the migration of the driver to stop using the legacy ->select_chip() hook, there is nothing deselecting the target anymore, thus the selection is not forced at the next access. Ensure the ND_RUN bit and the interrupts are always in a clean state. Cc: Daniel Mack <daniel@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- Changes in v2: * Also include the reset of the interrupts each time marvell_nfc_select_target() is called. drivers/mtd/nand/raw/marvell_nand.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index f38e5c1b87e4..d984538980e2 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip, struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); u32 ndcr_generic; - if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die) - return; - - writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0); - writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1); - /* * Reset the NDCR register to a clean state for this particular chip, * also clear ND_RUN bit. @@ -739,6 +733,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip, /* Also reset the interrupt status register */ marvell_nfc_clear_int(nfc, NDCR_ALL_INT); + if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die) + return; + + writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0); + writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1); + nfc->selected_chip = chip; marvell_nand->selected_die = die_nr; } -- 2.19.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/