[PATCH 06/10] mtd: rawnand: gpmi: read buf in nand_read_page_op

[Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>]

The driver calls nand_read_page_op without a buffer passed and then
calls chip->legacy.read_buf to read the buffer afterwards which is
the same as passing the buffer nand_read_page_op in the first place.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 8c6aa8112923..6736d76fa1fb 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2250,8 +2250,7 @@ static int gpmi_ecc_read_oob(struct nand_chip *chip, int page)
 	memset(chip->oob_poi, ~0, mtd->oobsize);
 
 	/* Read out the conventional OOB. */
-	nand_read_page_op(chip, page, mtd->writesize, NULL, 0);
-	chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_read_page_op(chip, page, mtd->writesize, chip->oob_poi, mtd->oobsize);
 
 	/*
 	 * Now, we want to make sure the block mark is correct. In the
@@ -2260,8 +2259,7 @@ static int gpmi_ecc_read_oob(struct nand_chip *chip, int page)
 	 */
 	if (GPMI_IS_MX23(this)) {
 		/* Read the block mark into the first byte of the OOB buffer. */
-		nand_read_page_op(chip, page, 0, NULL, 0);
-		chip->oob_poi[0] = chip->legacy.read_byte(chip);
+		nand_read_page_op(chip, page, 0, chip->oob_poi, 1);
 	}
 
 	return 0;
@@ -2548,8 +2546,7 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
 		 * Read the NCB fingerprint. The fingerprint is four bytes long
 		 * and starts in the 12th byte of the page.
 		 */
-		nand_read_page_op(chip, page, 12, NULL, 0);
-		chip->legacy.read_buf(chip, buffer, strlen(fingerprint));
+		nand_read_page_op(chip, page, 12, buffer, strlen(fingerprint));
 
 		/* Look for the fingerprint. */
 		if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
@@ -2691,8 +2688,7 @@ static int mx23_boot_init(struct gpmi_nand_data  *this)
 
 		/* Send the command to read the conventional block mark. */
 		nand_select_target(chip, chipnr);
-		nand_read_page_op(chip, page, mtd->writesize, NULL, 0);
-		block_mark = chip->legacy.read_byte(chip);
+		nand_read_page_op(chip, page, mtd->writesize, &block_mark, 1);
 		nand_deselect_target(chip);
 
 		/*
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/