[PATCH 1/3] dt-bindings: mtd: sunxi: Add new compatible

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

The A33 NAND controller is slightly different than the A10+ ones,
eg. DMA handling is a bit different and a few register offsets
changed.

Introduce a new compatible to represent this version of the IP.

Also append '-controller' to the new compatible (which is required for
new compatibles) as this is describing a NAND controller and not a
NAND chip.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mtd/sunxi-nand.txt | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
index dcd5a5d80dc0..6128d41d8c59 100644
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -1,7 +1,12 @@
 Allwinner NAND Flash Controller (NFC)
 
 Required properties:
-- compatible : "allwinner,sun4i-a10-nand".
+- compatible : Must be one of:
+	       - "allwinner,sun4i-a10-nand"
+	       - "allwinner,sun8i-a33-nand-controller"
+	       The former may be used by all IPs, however sun8i family
+	       will need the second one in order to make use of the
+	       internal DMA capabilities.
 - reg : shall contain registers location and length for data and reg.
 - interrupts : shall define the nand controller interrupt.
 - #address-cells: shall be set to 1. Encode the nand CS.
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/