Use 'bool' type for the following boolean parameters. - write (write or read?) - dma_avail (DMA engine available or not?) Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> --- Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: - Use bool for dma_avail as well drivers/mtd/nand/raw/denali.c | 23 ++++++++++++----------- drivers/mtd/nand/raw/denali.h | 4 ++-- 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index b9bc406..a501d9e 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -533,7 +533,7 @@ static int denali_sw_ecc_fixup(struct nand_chip *chip, } static void denali_setup_dma64(struct denali_nand_info *denali, - dma_addr_t dma_addr, int page, int write) + dma_addr_t dma_addr, int page, bool write) { uint32_t mode; const int page_count = 1; @@ -547,7 +547,8 @@ static void denali_setup_dma64(struct denali_nand_info *denali, * burst len = 64 bytes, the number of pages */ denali->host_write(denali, mode, - 0x01002000 | (64 << 16) | (write << 8) | page_count); + 0x01002000 | (64 << 16) | + (write ? BIT(8) : 0) | page_count); /* 2. set memory low address */ denali->host_write(denali, mode, lower_32_bits(dma_addr)); @@ -557,7 +558,7 @@ static void denali_setup_dma64(struct denali_nand_info *denali, } static void denali_setup_dma32(struct denali_nand_info *denali, - dma_addr_t dma_addr, int page, int write) + dma_addr_t dma_addr, int page, bool write) { uint32_t mode; const int page_count = 1; @@ -568,7 +569,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali, /* 1. setup transfer type and # of pages */ denali->host_write(denali, mode | page, - 0x2000 | (write << 8) | page_count); + 0x2000 | (write ? BIT(8) : 0) | page_count); /* 2. set memory high address bits 23:8 */ denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); @@ -628,7 +629,7 @@ static int denali_pio_write(struct denali_nand_info *denali, const u32 *buf, } static int denali_pio_xfer(struct denali_nand_info *denali, void *buf, - size_t size, int page, int write) + size_t size, int page, bool write) { if (write) return denali_pio_write(denali, buf, size, page); @@ -637,7 +638,7 @@ static int denali_pio_xfer(struct denali_nand_info *denali, void *buf, } static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, - size_t size, int page, int write) + size_t size, int page, bool write) { dma_addr_t dma_addr; uint32_t irq_mask, irq_status, ecc_err_mask; @@ -694,7 +695,7 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, } static int denali_page_xfer(struct nand_chip *chip, void *buf, size_t size, - int page, int write) + int page, bool write) { struct denali_nand_info *denali = to_denali(chip); @@ -715,7 +716,7 @@ static int denali_read_page(struct nand_chip *chip, uint8_t *buf, int stat = 0; int ret; - ret = denali_page_xfer(chip, buf, mtd->writesize, page, 0); + ret = denali_page_xfer(chip, buf, mtd->writesize, page, false); if (ret && ret != -EBADMSG) return ret; @@ -744,7 +745,7 @@ static int denali_write_page(struct nand_chip *chip, const uint8_t *buf, { struct mtd_info *mtd = nand_to_mtd(chip); - return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, 1); + return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, true); } static int denali_setup_data_interface(struct nand_chip *chip, int chipnr, @@ -1001,7 +1002,7 @@ static int denali_attach_chip(struct nand_chip *chip) int ret; if (ioread32(denali->reg + FEATURES) & FEATURES__DMA) - denali->dma_avail = 1; + denali->dma_avail = true; if (denali->dma_avail) { int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32; @@ -1010,7 +1011,7 @@ static int denali_attach_chip(struct nand_chip *chip) if (ret) { dev_info(denali->dev, "Failed to set DMA mask. Disabling DMA.\n"); - denali->dma_avail = 0; + denali->dma_avail = false; } } diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 4447184..d2603c6 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -303,7 +303,7 @@ struct denali_nand_info { u32 irq_mask; /* interrupts we are waiting for */ u32 irq_status; /* interrupts that have happened */ int irq; - int dma_avail; /* can support DMA? */ + bool dma_avail; /* can support DMA? */ int devs_per_cs; /* devices connected in parallel */ int oob_skip_bytes; /* number of bytes reserved for BBM */ int max_banks; @@ -313,7 +313,7 @@ struct denali_nand_info { u32 (*host_read)(struct denali_nand_info *denali, u32 addr); void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data); void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr, - int page, int write); + int page, bool write); }; #define DENALI_CAP_HW_ECC_FIXUP BIT(0) -- 2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/