[PATCH] mtd: rawnand: marvell: select target before setting up data interface

[Daniel Mack <daniel@xxxxxxxxxx>]

Now that the nand drivers are responsible for selecting the target
prior to hardware access, a call to marvell_nfc_select_target() is
necessary from marvell_nfc_setup_data_interface().

This is a regression introduced by commit b25251414f6e ("mtd:
rawnand: marvell: Stop implementing ->select_chip()").

Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
 drivers/mtd/nand/raw/marvell_nand.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 84283c6bb0ff..93abe5be8995 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2325,6 +2325,8 @@ static int marvell_nfc_setup_data_interface(struct nand_chip *chip, int chipnr,
 	struct marvell_nfc_timings nfc_tmg;
 	int read_delay;
 
+	marvell_nfc_select_target(chip, chip->cur_cs);
+
 	sdr = nand_get_sdr_timings(conf);
 	if (IS_ERR(sdr))
 		return PTR_ERR(sdr);
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/