[PATCH v2 34/36] mtd: nand: Add helpers to manage ECC engines and configurations

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Add the logic in the NAND core to find the right ECC engine depending
on the NAND chip requirements and the user desires. Right now, the
choice may be made between (more will come):
* software Hamming
* software BCH
* on-die (SPI-NAND devices only)

Once the ECC engine has been found, the ECC engine must be
configured.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/mtd/nand/core.c  | 124 +++++++++++++++++++++++++++++++++++++++
 include/linux/mtd/nand.h |   4 ++
 2 files changed, 128 insertions(+)

diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index 0a2be5e6d669..bed8977d94da 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -207,6 +207,130 @@ int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len)
 }
 EXPORT_SYMBOL_GPL(nanddev_mtd_max_bad_blocks);
 
+/**
+ * nanddev_get_ecc_engine() - Find and get a suitable ECC engine
+ * @nand: NAND device
+ */
+static int nanddev_get_ecc_engine(struct nand_device *nand)
+{
+	int provider;
+
+	/* Read the user desires in terms of ECC engine/configuration */
+	nand_ecc_read_user_conf(nand);
+
+	provider = nand->ecc.user_conf.provider;
+	if (provider == NAND_ECC_INVALID)
+		provider = nand->ecc.defaults.provider;
+
+	switch (provider) {
+	case NAND_ECC_NONE:
+		return 0;
+	case NAND_ECC_SOFT:
+		nand->ecc.engine = nand_ecc_get_sw_engine(nand);
+		break;
+	case NAND_ECC_ON_DIE:
+		nand->ecc.engine = nand_ecc_get_ondie_engine(nand);
+		break;
+	case NAND_ECC_HW:
+		pr_err("Hardware ECC engines not supported yet\n");
+		break;
+	default:
+		pr_err("Missing ECC engine provider\n");
+	}
+
+	if (!nand->ecc.engine)
+		return  -EINVAL;
+
+	return 0;
+}
+
+/**
+ * nanddev_put_ecc_engine() - Dettach and put the in-use ECC engine
+ * @nand: NAND device
+ */
+static int nanddev_put_ecc_engine(struct nand_device *nand)
+{
+	switch (nand->ecc.ctx.conf.provider) {
+	case NAND_ECC_HW:
+		pr_err("Hardware ECC engines not supported yet\n");
+		break;
+	case NAND_ECC_NONE:
+	case NAND_ECC_SOFT:
+	case NAND_ECC_ON_DIE:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * nanddev_find_ecc_configuration() - Find a suitable ECC configuration
+ * @nand: NAND device
+ */
+static int nanddev_find_ecc_configuration(struct nand_device *nand)
+{
+	int ret;
+
+	if (!nand->ecc.engine)
+		return -ENOTSUPP;
+
+	ret = nand_ecc_init_ctx(nand);
+	if (ret)
+		return ret;
+
+	if (!nand_ecc_correction_is_enough(nand))
+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+			nand->mtd.name);
+
+	return 0;
+}
+
+/**
+ * nanddev_ecc_engine_init() - Initialize an ECC engine for the chip
+ * @nand: NAND device
+ */
+int nanddev_ecc_engine_init(struct nand_device *nand)
+{
+	int ret;
+
+	/* Look for the ECC engine to use */
+	ret = nanddev_get_ecc_engine(nand);
+	if (ret) {
+		pr_err("No ECC engine found\n");
+		return ret;
+	}
+
+	/* No ECC engine requested */
+	if (!nand->ecc.engine)
+		return 0;
+
+	/* Configure the engine: balance user input and chip requirements */
+	ret = nanddev_find_ecc_configuration(nand);
+	if (ret) {
+		pr_err("No suitable ECC configuration\n");
+		nanddev_put_ecc_engine(nand);
+
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_ecc_engine_init);
+
+/**
+ * nanddev_ecc_engine_cleanup() - Cleanup ECC engine initializations
+ * @nand: NAND device
+ */
+void nanddev_ecc_engine_cleanup(struct nand_device *nand)
+{
+	if (nand->ecc.engine)
+		nand_ecc_cleanup_ctx(nand);
+
+	nanddev_put_ecc_engine(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_ecc_engine_cleanup);
+
 /**
  * nanddev_init() - Initialize a NAND device
  * @nand: NAND device
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 3498d22fe893..b3a5506a891b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -832,6 +832,10 @@ bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos);
 int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos);
 int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
 
+/* ECC related functions */
+int nanddev_ecc_engine_init(struct nand_device *nand);
+void nanddev_ecc_engine_cleanup(struct nand_device *nand);
+
 /* BBT related functions */
 enum nand_bbt_block_status {
 	NAND_BBT_BLOCK_STATUS_UNKNOWN,
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/